You can:
- move your dampers towards center of the chassis (if you didn't do so yet)
- longer lower suspension arms using additional spacers
Have the dampers closest to center.
Could not find a spacer that would fit so i took tires with high offset. Not they dont rub on the spring and the var runs smooth.
What spacers fit?
You can use:
- 210063W
- 820054W or 820054R, but you need to drill them a bit with 3mm drill
- any 3x5.8x? mm spacer, where ? is spacer thickness
I use rim with offset +8
Damper position on the lower arm is the innermost
Should not hit the damper if I'm not mistaken
Cheers,
kayFX