Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
50/50 Setup Template
#1
Chassis introduction: (Tell everyone about your chassis)

RC Drift Chassis Information
Manufacturer:
Model:
Track Surface:
Tires:
Motor and ESC:
Servo:

Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in):
Toe (Degrees) (Specify Toe in or out):
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm):
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):

Rear Setup
Camber (Degrees) (Positive is out, Negative is in):
Toe (Degrees) (Specify Toe in or out):
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm):
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):

Drivetrain (Optional)
Front Belt (mm or teeth):
Rear Belt (mm or teeth):
Front Pulley (teeth and differential type):
Front Center Pulley (teeth and differential type):
Rear Center Pulley (teeth and differential type):
Rear Pulley (teeth and differential type):

Gearing
Spur (teeth and pitch):
Pinion (teeth and pitch):
[Image: dmsig02.jpg]
Reply
#2
RC Drift Chassis Information

Manufacturer:MST

Model:MS-01D Pro

Track Surface: Rough Asphalt/Cracked driveway/ clay tennis court

Tires:Raikou D70, MST kit set

Motor and ESC:Flux vapor system 5900 kv

Servo:Spektrum S6040 (borrowed, getting rc omg bf or cf soon)



Chassis Settings

Front Setup

Camber (Degrees) (Positive is out, Negative is in): -6

Toe (Degrees) (Specify Toe in or out):1 in

Caster angle (Degrees):10

Kick-up (mm): stock

Sway Bar (yes/no):no

Ride Height (mm): 6mm

Springs (indicate type, length, hardness, etc): MST aluminum threaded with alumin spring stays

Damper Oil (indicate weight or #):30w

Upper Damper Position (Lower # indicates inner most position): 2

Lower Damper Position (Lower # indicates inner most position):1

Other (Weights, Mods, etc): aluminum steering assembly



Rear Setup

Camber (Degrees) (Positive is out, Negative is in): -4

Toe (Degrees) (Specify Toe in or out): 4 ish out

Caster (Degrees):10

Kick-up (mm): stick

Sway Bar (yes/no):no

Ride Height (mm): 5mm

Springs (indicate type, length, hardness, etc):Stock

Damper Oil (indicate weight or #): 30

Upper Damper Position (Lower # indicates inner most position):2

Lower Damper Position (Lower # indicates inner most position):2

Other (Weights, Mods, etc):

Drivetrain

Front Belt (mm or teeth):228mm

Rear Belt (mm or teeth):stock

Front Pulley (teeth and differential type):36t fow

Front Center Pulley (teeth and differential type):18t

Rear Center Pulley (teeth and differential type):18t

Rear Pulley (teeth and differential type):36t aluminum spool



Gearing

Spur (teeth and pitch):90t 64p

Pinion (teeth and pitch): 23t 64p (about to put on 16t)
Reply
 


Forum Jump:


Users browsing this thread: 1 Guest(s)


About DriftMission.com - Your Home for RC Drifting

Your home for everything RC Drift! DriftMission.com offers RC Drift news, reviews, guides, chassis, videos, tips, countersteer tools, bodies, builds and more!

Serving up the latest RC Drift content since 2011.