I have 8* caster, possibly 9-10. I need my front rear suspension blocks to come in for a definite reading.
Track width is 152mm (read from center-center of the lower ball ends)
with 8mm offset wheels
man that is beautiful!!! i have the same rims.. on my Mark II.. looking great so far..
The underdog drifter....
Did you have "Reedy in a can" to spray on the comm?
I've been thinking about wider LP35 or LP38 T-Drifts on the rear for RWD. should add to the grip/control level
I'll be testing tomorrow.
I guess I'll have to invest in more Overdose stuff.
it's just too tempting to Bling a drift package / conversion.
Hey, be careful.
The Kazama mounts make adjustment a bit painful.
remember you have them installed.
I forgot and then the shock fell out because I had unwound the Kazama top off instead of setting the rebound. HEHAHAE
I am using them with the with the shorter Drift Package shocks rather than the DRB SS size shocks because of the length.
Even with the Team Suzuki mounts you don't get much stroke.
See if you can use the upper mounting holes on the rear tower to maintain the long stroke.
haha.
Am I tempting you Russ? haha
Haha, when I first installed them and changed the pre-load, the whole shock turned instead, so now I have to use two hands. Not too much of an issue though.
Im using longer bottom mounts. (The drb connectors that are 16.75mm in length)
As it sits, the rear has 6mm ride height, at full rebound (no droop limit) I have 15mm of ride height. And after bottoming out, i still have 3mm of compression.