Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Exceed RC Drift King Brushed edition
#1
I have an Exceed RC DK Brushed edition and I have have no complaints other than the esc and switch coming loose, other than that its pretty fun to play with it. I'm just looking for tips for the 50/50 setup and was wondering what should I upgrade to help the car drift better? Any suggestions would be greatly appreciated.
Reply
#2
I have the drift star, love it, it's currently rwd, but as for the 50/50 I think a great setup is stiffer rear shocks and springs, and lighter up front, and u can also get the high angle Cvds and do the steering lock mod and it will allow u to get more angle on your drifts:) and also can lock up the rear diff......as far as other upgrades well I think the stock chassis does well as it is:) imo
>SCREW IT, DONT NEED NO FANCY SIG<
Reply
#3
(07-30-2013, 01:14 AM)RCPHREEK Wrote:  I have the drift star, love it, it's currently rwd, but as for the 50/50 I think a great setup is stiffer rear shocks and springs, and lighter up front, and u can also get the high angle Cvds and do the steering lock mod and it will allow u to get more angle on your drifts:) and also can lock up the rear diff......as far as other upgrades well I think the stock chassis does well as it is:) imo


Thanks for the advice. Do you know where I can get the steering lock mod? Or is it something that I can do like locking the diff?
Reply
#4
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM
>SCREW IT, DONT NEED NO FANCY SIG<
Reply
#5
(07-30-2013, 05:15 AM)RCPHREEK Wrote:  Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
Reply
#6
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  
(07-30-2013, 05:15 AM)RCPHREEK Wrote:  Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck
>SCREW IT, DONT NEED NO FANCY SIG<
Reply
#7
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  
(07-30-2013, 05:15 AM)RCPHREEK Wrote:  Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

I see you mentioned that your car is rwd. To get that do you just remove the shaft? (ikniw this isnt the thread for it) I tried that to see what would happen and just spun and didn't get anywhere.

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  
(07-30-2013, 05:15 AM)RCPHREEK Wrote:  Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

I see you mentioned that your car is rwd. To get that do you just remove the shaft? (iknow this isnt the thread for it and that was a noob question) I tried that to see what would happen and just spun and didn't get anywhere.

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck

(08-03-2013, 02:23 PM)PaintNBody1996 Wrote:  
(07-31-2013, 05:09 PM)RCPHREEK Wrote:  
(07-30-2013, 05:44 AM)PaintNBody1996 Wrote:  [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM


Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob;) good luck
Reply
#8
I have a redcat. What i did is take apart my rear diff and cleaned it and let dry. As i put the peices together i used jb weld to lock everything inside. Glued it permanenty because there will be no regret. Let it dry naturally for a few hours and you will be ready to rock. ... i also added some weight on front bumper and made major improvemen[/i]t.
Reply
#9
If u lock yur rear diff in yur red cat youll wanna think about locin your front as well or even getting a front one way diff. W/ a slip diff in the front and locked in the back u might spin out too much. W/ the front locked youll lose a little lock but u can get it back w/ the lock mods.
Reply
#10
If u lock only the rear it does tend to over steer easy, I just tightened up the rear susp a lil and it helped!!
>SCREW IT, DONT NEED NO FANCY SIG<
Reply
 


Forum Jump:


Users browsing this thread: 1 Guest(s)


About DriftMission.com - Your Home for RC Drifting

Your home for everything RC Drift! DriftMission.com offers RC Drift news, reviews, guides, chassis, videos, tips, countersteer tools, bodies, builds and more!

Serving up the latest RC Drift content since 2011.