iStanceDaily Rocket Bunny FD3S RX-7

17 Replies, 5679 Views

I will be making a build log of my third RC Body. I have had practice with two previous bodies and it is time for a new one. This will be my first wide-body kit that I have ever done. I have learned many new Technics and will be applying them to this car. Most of the accessories had just come in from Hong Kong (Ordered through RC Mart).
[Image: rS6BIJ2.jpg]

Unpainted:

[Image: attachment.php?aid=3343]


Attached Files Thumbnail(s)
   
(This post was last modified: 03-31-2016, 10:43 PM by bogusdrift774.)
Do you have a parts list of what you will be using?

-Vic
Stable
  • Yokomo DIB275 Premium (RWD Conversion)
  • Yokomo DPR (Hayato Yoshiba Spec)
  • Yokomo YD-4
  • Yokomo YD-2 PLUS
Drift Gundam Blog
Parts List:
Body/Shell - (Local Hobby Store: Galaxy Hobby)
  •  Tamiya FD3S RX-7 1/10 Scale Lexan Shell 
    TOTAL 49.95 CAN +tax 
Wide Body in Right Picture- (Demi Works Website)
  • DWRX7RB-B (RX-7 RB Set -B contains Fenders Set + Side Step) Top in Picture
  • DWRX7RB-A (RX-7 RB Set -A contains Trunk Wing +Front Bumper ) Bottom in Picture
    TOTAL 54.0 EUR
Accessories in Left Picture- (All ordered from RC Mart) 
  • Wrap Up Next Komakalzo REAL Inspection Decal
  • Wrap Up Next REAL 3D Bonnet Pin Decal Set
  • Yokomo Drift Package Aluminum Exhaust Pipe 12mm 
  • Slidelogy Shiny Carbon Pattern Rear Spoiler 1 pc Black w/ Stands Type I
  • Xtra Speed Aluminum Intercooler w/ Pipe
  • ABC Hobby Micro Line Tape 0.3MM x 5M
  • ABC Hobby Masking Tape 15mm Width x 18m
  • ABC Hobby Micro Fender Screw Set 1.8 x 4.25 x 1.2mm 50pcs Black
  • Wrap Up Next Real 3D Window Tint Film 250x200mm Dark Gray 
    TOTAL : 69.7 USD w/o ship
       
(This post was last modified: 03-31-2016, 10:45 PM by bogusdrift774.)
Build will start in one week.
(This post was last modified: 02-20-2016, 10:17 PM by bogusdrift774.)
Subscribing to this one
(02-20-2016, 08:02 PM)glenyboy Wrote: Subscribing to this one
       
Appreciated  :=): Here are the my other two. The 350z was my first one and the R32 my second.
(This post was last modified: 02-20-2016, 10:40 PM by bogusdrift774.)
Gunna keep an eye on this one. I love rx7s.
I am doing the same build in a few weeks! I will be following this as well.
At last, finally started the build. So far I have the body shell cut out and part of the front bumper of the Rocket Bunny Kit cut out.
           
(don't  mind the scratches, it is just the over film that got ruffed up by the scissors)

UPDATE: Bumper cut and test fitted...
   
   
Will sand all components after everything has been cut.
(This post was last modified: 03-15-2016, 02:57 AM by bogusdrift774.)
The kit and the shell have been sanded, washed and dried.

   

They are now ready for masking tape and paint!!

   


Original fender cut so it can be slammed.  :devil:
(This post was last modified: 03-15-2016, 02:58 AM by bogusdrift774.)



Users browsing this thread: 1 Guest(s)