Please advise me, I despair at how management control setting should I use for 90 degrees for all the advice I will be grateful ,Inner wheel tends jams((
pls help me
4 Replies, 2305 Views
try reducing your toe out a bit and grind back the inside of the lower arms for clearance. have a look at hobby best on ebay for the MST FXX front lower arms to replace the mod youv'e done already
(This post was last modified: 11-27-2013, 07:14 AM by pickled.)
Thank you, I will send photos as I edited the management but unfortunately I can not figure how to prevent NATO movement inside wheel hangs in the air indicated by a red I'll be glad for all the hints and tips :=L:
you'll likely have to limit the steering some, i have my inner wheel jam sometimes but you may want to try these arms. http://rc-art.net/product_eng/639342097098
the push the point further forward so you get better movement and less locking.
Please advise should be reduced caster or not? how much is determined by the distance indicated by a star, thanks!!!!:^^:
(This post was last modified: 12-20-2013, 02:54 PM by backagain.) |
Users browsing this thread: 1 Guest(s)