My RWD conversion is now complete.
Ive sold 5 as kits , sold 3 as full builds and kept 3 for myself including an upgraded prototype. I've got 4 on the way for a few reservations.
New black twill and Silver SSG are pretty cool
RE-Xtreme RC .RSG. Design
DRB-REW ( Rear Evolution Weight Shift ) Conversion Set
1 x 2.5mm Main Chassis Plate
A Contents
Main Component Set
1 x 2.0 mm Carbon Upper Deck
1 x 2.0 mm Battery Mount
1 x 2.0 mm Bridge Spacer Set (2pcs)
RWD Specific Optional parts.
1 x 2.0 mm Carbon Wiper Extension set Forward Narrow (2pcs)
1 x 2.0 mm Carbon Wiper Extension set Forward Wide (2pcs)
1 x 2.0 mm Carbon Wiper Extension set Rearward Long (2pcs)
Optional Parts
1 x 2.0 mm Carbon Bulkhead Support (2PCS)
1 x 2.0 mm Front Bulkhead Servo Mount
B Contents
Weight Shift Component Set
5.0 mm ( 2.5 mm x 2 ) Bulkhead Spacer Set ( 10 pcs)
2 x 2.5 mm Motor Mount - Left
2 x 2.5 mm Pulley Mount - Right
2 x 2.5 mm center BulkHead
2 x 2.5 mm Front Bulkhead
2 x 2.5 mm Rear Bulkhead
1 x 3.0 mm Carbon Front Shock Tower
1 x 2.0 mm Carbon Front Upper Arm Support
1 x 3.0 mm Carbon Rear Shock Tower
C Contents
Battery Support Spacers
4 x 4 mm x 18 mm Carbon Spacers
4 x M3x30mm Stainless Steel Countersink Screw
17 x M3x12mm Stainless Steel Countersink Screw
tried to box up in a professional-ish manner. Small quantities means exact size boxes are a DIY proposition.
Prototype is now using normal DRB ackerman bar with VX knuckles and REW extensions. I'll switch to twin servo soon.
VX front knuckles are awesome.
DP wipers are a good option. REVERSE motor direction required for normal spur/pinion.
Note front centre bulkhead servo position is available. Next setup on this chassis will be an inverted servo between the bulkhead.
Ninja spec. GRK Slide Rack. Now being setup for duty with new OD front knuckles. Review to come.
Customer Build. WUN items will be used up front. Custom anodising will be employed.
deciding final spec at the moment. loving the new black twill though.