Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
RE-Xtreme RX-666-7
#1
[Image: RE-Xtreme_20140426_103.jpg]

The Grim Reaper is complete. But it was a long build.

[Image: RE-Xtreme_FD666_03.jpg]

Originally going to be a full d1 style livery the fitment of all these pieces couldn't guarantee matching lines. So I just went black. And I'm very happy.

[Image: RE-Xtreme_20140426_18.jpg]

Pandora RC Fd3s + HPI Stage D kit with a lot of modification.

[Image: RE-Xtreme_FD666_05.jpg]

initial test was promising.

[Image: RE-Xtreme_20140426_17.jpg]

you can see the rear fenders are spaced wide for smoke exit (read don't fit) and the doors had to be cut down. The HPI wheelbase is in a different position completely, so there was a lot of cut and shut.

Rear wing is Active Hobby and Yokomo Wing stays and mirrors, Yokomo light buckets at the rear and HPi up front.

[Image: RE-Xtreme_20140426_109.jpg]

Diffuser is a modified Yokomo S14 item donated from this car. A bit of darth vader / Luke Skywalker battle.

[Image: RE-Xtreme_20140426_102.jpg]

This is the angle we get out of CS 3.0 DRb.

[Image: RE-Xtreme_20140426_115.jpg]

I'm running it on this chassis.

Street Spec Tune.

I love the black rims but it is very hard to see at night.

[Image: RE-Xtreme_20140426_108.jpg]

So these are alternates.

[Image: RE-Xtreme_FD666_40.jpg]

I have many sets.

http://rextremerc.blogspot.com.au/2014/0...eeper.html

A little story here.

[Image: RE-Xtreme_FD666_43.jpg]

Should I add these scoops???
Reply
#2
(04-26-2014, 04:19 PM)RE-Xtreme RC Wrote:  [Image: RE-Xtreme_20140426_103.jpg]

The Grim Reaper is complete. But it was a long build.

[Image: RE-Xtreme_FD666_03.jpg]

Originally going to be a full d1 style livery the fitment of all these pieces couldn't guarantee matching lines. So I just went black. And I'm very happy.

[Image: RE-Xtreme_20140426_18.jpg]

Pandora RC Fd3s + HPI Stage D kit with a lot of modification.

[Image: RE-Xtreme_FD666_05.jpg]

initial test was promising.

[Image: RE-Xtreme_20140426_17.jpg]

you can see the rear fenders are spaced wide for smoke exit (read don't fit) and the doors had to be cut down. The HPI wheelbase is in a different position completely, so there was a lot of cut and shut.

Rear wing is Active Hobby and Yokomo Wing stays and mirrors, Yokomo light buckets at the rear and HPi up front.

[Image: RE-Xtreme_20140426_109.jpg]

Diffuser is a modified Yokomo S14 item donated from this car. A bit of darth vader / Luke Skywalker battle.

[Image: RE-Xtreme_20140426_102.jpg]

This is the angle we get out of CS 3.0 DRb.

[Image: RE-Xtreme_20140426_115.jpg]

I'm running it on this chassis.

Street Spec Tune.

I love the black rims but it is very hard to see at night.

[Image: RE-Xtreme_20140426_108.jpg]

So these are alternates.

[Image: RE-Xtreme_FD666_40.jpg]

I have many sets.

http://rextremerc.blogspot.com.au/2014/0...eeper.html

A little story here.

[Image: RE-Xtreme_FD666_43.jpg]

Should I add these scoops???

Only add one scoop, two scoops looks like something out of nfs. And keep those red wheels with that body cause they look so so good on it.
[Image: bc276304-7f08-4025-b335-bd41c864c078_zps5043df43.jpg]
Reply
#3
(04-26-2014, 04:25 PM)united. Wrote:  
(04-26-2014, 04:19 PM)RE-Xtreme RC Wrote:  [Image: RE-Xtreme_20140426_103.jpg]

The Grim Reaper is complete. But it was a long build.

[Image: RE-Xtreme_FD666_03.jpg]

Originally going to be a full d1 style livery the fitment of all these pieces couldn't guarantee matching lines. So I just went black. And I'm very happy.

[Image: RE-Xtreme_20140426_18.jpg]

Pandora RC Fd3s + HPI Stage D kit with a lot of modification.

[Image: RE-Xtreme_FD666_05.jpg]

initial test was promising.

[Image: RE-Xtreme_20140426_17.jpg]

you can see the rear fenders are spaced wide for smoke exit (read don't fit) and the doors had to be cut down. The HPI wheelbase is in a different position completely, so there was a lot of cut and shut.

Rear wing is Active Hobby and Yokomo Wing stays and mirrors, Yokomo light buckets at the rear and HPi up front.

[Image: RE-Xtreme_20140426_109.jpg]

Diffuser is a modified Yokomo S14 item donated from this car. A bit of darth vader / Luke Skywalker battle.

[Image: RE-Xtreme_20140426_102.jpg]

This is the angle we get out of CS 3.0 DRb.

[Image: RE-Xtreme_20140426_115.jpg]

I'm running it on this chassis.

Street Spec Tune.

I love the black rims but it is very hard to see at night.

[Image: RE-Xtreme_20140426_108.jpg]

So these are alternates.

[Image: RE-Xtreme_FD666_40.jpg]

I have many sets.

http://rextremerc.blogspot.com.au/2014/0...eeper.html

A little story here.

[Image: RE-Xtreme_FD666_43.jpg]

Should I add these scoops???

Only add one scoop, two scoops looks like something out of nfs. And keep those red wheels with that body cause they look so so good on it.

+1 on the single scoop, unless you can get it to spray smoke purge in red like it's straight from nfsu2.

Sent from my VS980 4G using Tapatalk
Current Chassis:Team Magic E4-FS, Team Magic E4D-MF Pro
Reply
#4
all these repost quotes is making me dizzy. Anyways, I've been following this build on your blog. Nice to see it finished and being sexy as hell. Looks really clean as is without the scoops, but knowing your Gt86 rocket bunny shell you'll most likely install a scoop or two hehe.
[Image: 4028172207455215s.jpg]
Overdose Drift Package RWD
CER D08 Premium RWD
Yokomo DRB Overdose RWD
Ce-RX type R White Wolf RWD
Reply
#5
This has to be my favorite fd3s of all time! Great work! Love the black on black on black on black .. :D

No need for scoops in my opinion. Looks just the right amount of clean without it.

On another note:
(04-26-2014, 09:43 PM)lougc8 Wrote:  all these repost quotes is making me dizzy.

This ^ :) Couldn't agree more.
Enroute JXRWD 

Mad Machine IG / Mad Machine FB
Reply
#6
over quotes...damn.

no intakes, love the red wheels!!!! What wheels are those? LOVE the concavity and realistic look!
Reply
#7
Wow very nice

Sent from my C6603 using Tapatalk
[Image: 1975048_10152286815453540_1226896195_n.jpg]
Reply
#8
Definitely like the look of this one.
-RexRacer19

Eagle Racing TT02 FRD
Sakura D3 & D4

Visit my blog: Mod19 RC
IG: @RexRacer19

[Image: IMG_2485c_zpsnoqm5qqh.jpg]
Reply
#9
the black style is very nice. I wouldn't add any scoop
Reply
 


Forum Jump:


Users browsing this thread: 1 Guest(s)


About DriftMission.com - Your Home for RC Drifting

Your home for everything RC Drift! DriftMission.com offers RC Drift news, reviews, guides, chassis, videos, tips, countersteer tools, bodies, builds and more!

Serving up the latest RC Drift content since 2011.