Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rx 3 for new mst 01d pro
#1
Ok lets get started,firstly this will be my first post in this thread. So all replys,views and ideas would be greatly appreciated. Just got a brand spanking new mst ms-01d pro, have been building for the last fortnight after work each night. The build is complete so here are some pics of it, was a pretty easy build considering I've never done it before.

.jpg   20150927_151411(2).jpg (Size: 430.75 KB / Downloads: 12)

.jpg   20150927_151446(1).jpg (Size: 318 KB / Downloads: 11)
Now for the real reason where here the Rx3. I haven't seen to many builds on this body but I'm sure its been done, anyway this is right at the beginning and I would like ideas and input from you guys on colour, openings, motor etc....... here is  the blank canvas

.jpg   1443335754685(1).jpg (Size: 263.76 KB / Downloads: 12)

.jpg   20150927_164330(1).jpg (Size: 681.62 KB / Downloads: 14)
Wow heaps of suff to cut out and stick on

.jpg   20150927_164615(1).jpg (Size: 352.26 KB / Downloads: 14)
Reply
#2
(09-27-2015, 02:10 AM)villain rc Wrote:  Ok lets get started,firstly this will be my first post in this thread. So all replys,views and ideas would be greatly appreciated. Just got a brand spanking new mst ms-01d pro, have been building for the last fortnight after work each night. The build is complete so here are some pics of it, was a pretty easy build considering I've never done it before.


Now for the real reason where here the Rx3. I haven't seen to many builds on this body but I'm sure its been done, anyway this is right at the beginning and I would like ideas and input from you guys on colour, openings, motor etc....... here is  the blank canvas


Wow heaps of suff to cut out and stick on
just Quick update bit crook today. Cut shell out 1 pass with a new blade and out she pops and I think the results speak for themselves. 


.jpg   20150927_173314(1).jpg (Size: 483.6 KB / Downloads: 10)

.jpg   20150927_173852(1).jpg (Size: 494.12 KB / Downloads: 10)
Reply
#3

.jpg   20150928_175758(1).jpg (Size: 528.87 KB / Downloads: 10)
a few new hop ups from mrcplaza mad store if you in oz cheap and fast shipping  cheers

Been a couple of weeks since I last posted anything about this build. I have been doing heaps of research on liquid masks looking into getting an airbrush setup more $$$$ lol I love it cause he who dies with the most toys wins hahahahaha, although my missus wouldn't agree.
Anyway found out about gum glue as a mask its easy to get as bob divleys has to be shiped and anything out of the states at the moment is bullshit for shipping and our dollar is crap too. So masked it with gum glue about 3-4 coats very thin coats ( should of been a bit more heavy handed) and started my design. This took me for ever a little each night most of the last 2 weekends too but have really enjoyed it. I didn't get an airbrush yet and it would of made this a hell of alot easier and neater, so it was spray cans layer after layer and here are the results not perfect by any means but not to bad at least it worked and I didn't have to spray the outside of the shell black (which was plan b) still loads left to do an will update again when more is completed 

.jpg   20151011_163908(1).jpg (Size: 129.57 KB / Downloads: 9)

.jpg   20151011_164037(1).jpg (Size: 146.95 KB / Downloads: 9)
Reply
 


Forum Jump:


Users browsing this thread: 1 Guest(s)


About DriftMission.com - Your Home for RC Drifting

Your home for everything RC Drift! DriftMission.com offers RC Drift news, reviews, guides, chassis, videos, tips, countersteer tools, bodies, builds and more!

Serving up the latest RC Drift content since 2011.