Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Sakura D4 weight shift
#1
This is my Sakura D4.I had a d3 which i modded for rwd but when i saw the d4 i knew i wanted it.i was always admiring the guys using the d-like chassis.always realistic driving and realistic behaviour,so i wanted to achieve stg similar since i cant afford the chassis.i am slowly trying new weight shifting mods.


RC Drift Chassis Information
Manufacturer:  3RACING
Model:  SAKURA D4 RWD
Track Surface: 
Motor and ESC: 
Servo: 

Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in):  -8
Toe (Degrees) (Specify Toe in or out):  -2
Caster (Degrees):  -15
King Pin Angle (Degrees):  6
Kick-up (mm):  0.5MM
Sway Bar (yes/no):  NO
Ride Height (mm):  8MM
Springs (indicate type, length, hardness, etc): 
Damper Oil (indicate weight or #):  TEAM ASSOCIATED 10WT
Upper Damper Position (Lower # indicates inner most position):  MOST OUTER
Lower Damper Position (Lower # indicates inner most position):  MOST INNER
Front Tires (Type):  MST FR-F MEDIUM
Other (Weights, Mods, anything else that can effect performance):  MST FXX HUBS,3RACING SPORT BRAKE CALIPER SET,3RACING BLACK SLIDE RACK,sakura d3 front axle(wide angle)

Rear Setup
Camber (Degrees) (Positive is out, Negative is in):  1
Toe (Degrees) (Specify Toe in or out):  2
Caster (Degrees):  0
Kick-up (mm):  a litlle pro-squat
Sway Bar (yes/no):  no
Ride Height (mm):  9
Springs (indicate type, length, hardness, etc):  speedline progressive hard
Damper Oil (indicate weight or #): 
Upper Damper Position (Lower # indicates inner most position): 2 holes inside from outer position
Lower Damper Position (Lower # indicates inner most position):  most outer(suspension arms revesred)
Rear Tires (Type):  raikou dp20
Other (Weights, Mods, anything else that can effect performance):  Oxygen motor mount,4mm spacers for the rear turnbuckle on the hub(photo),sakura d3 rear diffuser,40grams weight on the diffuser

Drivetrain
Rear Drive Ratio: 

Gearing
Spur (teeth and pitch): 92t 48p
Pinion (teeth and pitch):  24t 48p

Gyro
Type: yhea racing cg301


photos are coming!
Drifting for fun!!!
Reply
#2
(05-15-2017, 02:34 PM)STEVETC5R Wrote:  This is my Sakura D4.I had a d3 which i modded for rwd but when i saw the d4 i knew i wanted it.i was always admiring the guys using the d-like chassis.always realistic driving and realistic behaviour,so i wanted to achieve stg similar since i cant afford the chassis.i am slowly trying new weight shifting mods.


RC Drift Chassis Information
Manufacturer:  3RACING
Model:  SAKURA D4 RWD
Track Surface: 
Motor and ESC: 
Servo: 

Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in):  -8
Toe (Degrees) (Specify Toe in or out):  -2
Caster (Degrees):  -15
King Pin Angle (Degrees):  6
Kick-up (mm):  0.5MM
Sway Bar (yes/no):  NO
Ride Height (mm):  8MM
Springs (indicate type, length, hardness, etc): 
Damper Oil (indicate weight or #):  TEAM ASSOCIATED 10WT
Upper Damper Position (Lower # indicates inner most position):  MOST OUTER
Lower Damper Position (Lower # indicates inner most position):  MOST INNER
Front Tires (Type):  MST FR-F MEDIUM
Other (Weights, Mods, anything else that can effect performance):  MST FXX HUBS,3RACING SPORT BRAKE CALIPER SET,3RACING BLACK SLIDE RACK,sakura d3 front axle(wide angle)

Rear Setup
Camber (Degrees) (Positive is out, Negative is in):  1
Toe (Degrees) (Specify Toe in or out):  2
Caster (Degrees):  0
Kick-up (mm):  a litlle pro-squat
Sway Bar (yes/no):  no
Ride Height (mm):  9
Springs (indicate type, length, hardness, etc):  speedline progressive hard
Damper Oil (indicate weight or #): 
Upper Damper Position (Lower # indicates inner most position): 2 holes inside from outer position
Lower Damper Position (Lower # indicates inner most position):  most outer(suspension arms revesred)
Rear Tires (Type):  raikou dp20
Other (Weights, Mods, anything else that can effect performance):  Oxygen motor mount,4mm spacers for the rear turnbuckle on the hub(photo),sakura d3 rear diffuser,40grams weight on the diffuser

Drivetrain
Rear Drive Ratio: 

Gearing
Spur (teeth and pitch): 92t 48p
Pinion (teeth and pitch):  24t 48p

Gyro
Type: yhea racing cg301


photos are coming!

im in the same path regarding d-like chassis. I recently had a big path of upgrade on my D4, which includes overslide battery rack for high center gravity & aluminum suspension block for better rigidity. cant wait to see how the behavior changes. my next plan would be getting D-like F&R knuckles for VX-suspension setup.
Reply
#3
I am on the D4 RWD boat...I bought ever since it first came out but have been so budy. I just finally finished building it stock. I found the stock steering components too sloppy. I upgraded to BoomRacing alum parts and took the slop out.

I already ahev tons of ugrade parts for it but will slowly add them as I continue to mod it. I still have a lot of tweaking to get it to where I can drive it.

I have a fully optioned D3 CS Sport with all kinds of mods that I love driving!

Sent from my SM-N935S using Tapatalk
Reply
 


Forum Jump:


Users browsing this thread: 1 Guest(s)


About DriftMission.com - Your Home for RC Drifting

Your home for everything RC Drift! DriftMission.com offers RC Drift news, reviews, guides, chassis, videos, tips, countersteer tools, bodies, builds and more!

Serving up the latest RC Drift content since 2011.