Hey guys! I have a problem with my savox servo where it does not return to its neutral position. I also found that it is not responding at my commands at all sometimes. Ex: I turn right on the controller but the servo does not move at all... Is it burned out?
Sent from my SGH-I747M using DriftMission.com, powered by appyet.com
you need a capacitor.
try: 4700mf 10 V to 6800mf 16V. they are cheap and you can find it at any hobbie shop...Traxxas is like 4.99 or 3.99. plug it to your ESC to boost. you might have a low power issue.
Here For the love of RC Drifting
probably a low power issue , if you have a high voltage , high speed savox . I had a low voltage issue with my savox 4096 digital coreless high speed , high voltage servo . A castle BEC between the battery and esc took care of the problem . your LHS can help you out .
RC926 plus type c 2.2 cs
HPI sprint 2 50/50
HPI rs4 nitro
proD clone
How is the installation on these parts? The instructions seems a bit messy and I don't fully understand how it works.
Sent from my SGH-I747M using DriftMission.com, powered by appyet.com