Speed Passion Reventon R Dokyo Combo

18 Replies, 8946 Views

(03-20-2014, 01:38 PM)Tiger.T Wrote: I cannot confirm if it is a V3.0 or not but I can say its not as smooth as a 3.0.
The magnet feels a lot rougher than the 3.0.
I tried it on a few cars and it runs good though. Especially if you go from brushed to brushless.
Also it is sensored.
The reventon R is a great ESC too. no need to go for the Pro. you'll hardly use all of the power of the pro.
Just make sure you run on the latest ESC.

+1 read somewhere it uses v3.0 parts, but built in fan and supposedly stronger magnets. Not as smooth as 3.0 though, but should be no problem for CS.
[Image: 4028172207455215s.jpg]
Overdose Drift Package RWD
CER D08 Premium RWD
Yokomo DRB Overdose RWD
Ce-RX type R White Wolf RWD
(03-19-2014, 05:59 AM)Revlimit48 Wrote: I run it in my ms01d and it is great. I like how small the esc is, I just wish all the wires didn't stick up so high so it could be mounted under the top deck easier.

I mounted mine like this:

[Image: e5y3udaq.jpg]

I have the wires sticking straight up between the belt and top deck. Works well. The belt clears easily, but next time I'm going to use 3:1 heat shrink, it's stiffer and would hold the wires in place all that much better.

Here's a top down:
[Image: e9yga2um.jpg]
MST MS-01D VIP II
Speed Passion Reventon PRO 1.1
Speed Passion 13.5t v3.0 MMM
Savox SG-1258TG
Airtronics MT4 w/ TX-461
Got mine in the mail today and it looks amazing!

Looks like a really top quality!


TT-01...
(03-27-2014, 09:51 AM)Pinxty Wrote: Got mine in the mail today and it looks amazing!

Looks like a really top quality!


TT-01...

Which one did you go with?
MST MS-01D VIP II
Speed Passion Reventon PRO 1.1
Speed Passion 13.5t v3.0 MMM
Savox SG-1258TG
Airtronics MT4 w/ TX-461
I got the 6.5 by accident...

I meant to get the 10.5


TT-01...
(03-19-2014, 05:59 AM)Revlimit48 Wrote: I run it in my ms01d and it is great. I like how small the esc is, I just wish all the wires didn't stick up so high so it could be mounted under the top deck easier.

What size pinion are you using with this setup? Thanks!
(03-24-2014, 01:32 AM)lougc8 Wrote:
(03-20-2014, 01:38 PM)Tiger.T Wrote: I cannot confirm if it is a V3.0 or not but I can say its not as smooth as a 3.0.
The magnet feels a lot rougher than the 3.0.
I tried it on a few cars and it runs good though. Especially if you go from brushed to brushless.
Also it is sensored.
The reventon R is a great ESC too. no need to go for the Pro. you'll hardly use all of the power of the pro.
Just make sure you run on the latest ESC.

+1 read somewhere it uses v3.0 parts, but built in fan and supposedly stronger magnets. Not as smooth as 3.0 though, but should be no problem for CS.

I'd be interested in finding out if it actually had stronger magnets, or did they just repackage the v3.0 with a fan... I know the MMM versions supposedly have stronger magnets.

I went with the Reventon PRO 1.1 and the 13.5t MMM combo.
MST MS-01D VIP II
Speed Passion Reventon PRO 1.1
Speed Passion 13.5t v3.0 MMM
Savox SG-1258TG
Airtronics MT4 w/ TX-461
(This post was last modified: 03-29-2014, 04:13 PM by Seegee911.)
What is the difference between the 8.5 and 10.5?
They have a spec sheet for the v3.0 motors in their downloads section. I don't think there's much more than a couple hundred RPM/volt. I use a 13.5t for drifting and it works great. If I need more speed, I just mess with the gearing.
MST MS-01D VIP II
Speed Passion Reventon PRO 1.1
Speed Passion 13.5t v3.0 MMM
Savox SG-1258TG
Airtronics MT4 w/ TX-461



Users browsing this thread: 1 Guest(s)