TAMIYA TA04

Manufacturer: tamiya
Model: ta04
Track Surface: ASPHALT
Tires: DC3
Motor and ESC: NOVAK SPORT 8.5
Servo: 590 SPEKTRUM

Chassis Settings - Grey Carbonfiber
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -3
Toe (Degrees) (Specify Toe in or out): 0 degrees
Caster (Degrees): -4
Kick-up (mm): 1
Sway Bar (yes/no): no
Ride Height (mm): 8mm
Springs (indicate type, length, hardness, etc): medium springs
Damper Oil (indicate weight or #): 40
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc): added weight to front of chassis

Rear Setup
Camber (Degrees) (Positive is out, Negative is in): -5
Toe (Degrees) (Specify Toe in or out):-3
Caster (Degrees): 0
Kick-up (mm): 3
Sway Bar (yes/no): yes
Ride Height (mm): 9mm
Springs (indicate type, length, hardness, etc): medium
Damper Oil (indicate weight or #): 40
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc): none

Drivetrain (Optional)
Front Belt (mm or teeth): stock
Rear Belt (mm or teeth): stock
Front Pulley (teeth and differential type): 30 oneway
Front Center Pulley (teeth and differential type): 15
Rear Center Pulley (teeth and differential type):15
Rear Pulley (teeth and differential type): 30 locked

Gearing
Spur (teeth and pitch):128
Pinion (teeth and pitch):39

[robb41488]

is this the setup you used in the comps?

i use my vdf for comps. this is my daily drifters

would love to see some pic's?