Posts: 19
Threads: 10
Joined: Apr 2014
Reputation:
0
Location: Bethesda, MD
Hi guys, I want to take this TT-01 to the next level by locking the rear differential. What is the best way to do this without breaking it. Some say Blue-Tac, some say 300wt fluid, Help please. Also, in the front, people say add a one-way. Please explain it.
Damien
TT-O1 Toyota 86/Nissan GTR 35
Damien
Drift DMV
TT-01 Drift Spec
Toyota 86
Posts: 532
Threads: 4
Joined: Nov 2012
Reputation:
1
Location: AU, SG, MY & ZZZzzz...
TT01 diff does not have fluid seals, you cannot use silicone fluid.
BluTac gets loose & needs redoing regularly.
Some ppl stuff it with rags or little rubberbands but that's no different either.
I like to use ShoeGoo. It doesn't need redoing but can be undone
when you need to by washing in solvent thinners.
Pull the diff apart & degrease thoroughly if its a used unit. No need if its brandnew.
Just glue the spidergears to the side bevels... don't let ShoeGoo touch sides of
casing or outdrive shafts & you can remove the glued unit easily.
Posts: 911
Threads: 30
Joined: Nov 2012
Reputation:
8
Location: The Hub
just take out one of the 3 small gears and shove it in between the other two gears. itll lock it and is easily reversible.
Team Ghost Drift
![[Image: TGD+official+WHITE+side+decal+Osaka-Sans...+edit1.png]](https://lh5.googleusercontent.com/-l_7SoVdAxY4/UMadInFHZLI/AAAAAAAAFXw/7bgT6vbgMZY/s171/TGD+official+WHITE+side+decal+Osaka-Sans_editedSide+edit1.png)
MST FS-01D cs@2.0
Yokomo DRB cs@1.8
Eagle  R31 RWD
Posts: 52
Threads: 5
Joined: Apr 2014
Reputation:
0
Location: Edinburgh
i always locked the rear diff of the tt01 with hot glue.. hot glue when is cold is easy to get out so is reversible too..
Posts: 51
Threads: 8
Joined: Jan 2017
Reputation:
0
Location: Colorado, USA
or you could just get a locking block...
Posts: 1
Threads: 0
Joined: Dec 2016
Reputation:
0
Location: South Yorkshire
In my TT02D i just pack my rear diff with thick grease and run a one way up front. I like the way it feels with a diff in.