Yokomo DIB

[wilkewhaq]

Chassis introduction: Yokomo DIB Red Version by DriftMission

RC Drift Chassis Information
Manufacturer: Yokomo
Model: DIB (Red Version)
Track Surface: Concrete
Tires: MST GA26 Compound (Silver dot)
Motor and ESC: Hobbywing XERUN V3.0 ESC with 8.5T Motor
Servo: RC OMG LDT062200B

Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -10
Toe (Degrees) (Specify Toe in or out): 0
Caster angle (Degrees): 12
King Pin Inclination (Degrees): 0
Kick-up (mm): 0
Sway Bar (yes/no): no
Ride Height (mm): 3mm
Springs (indicate type, length, hardness, etc): Vertex 31mm Yellow Progressive
Damper Oil (indicate weight or #): DMC Special Soup
Upper Damper Position (Lower # indicates inner most position): 5
Lower Damper Position (Lower # indicates inner most position): 1
Other (Weights, Mods, etc): no

Rear Setup
Camber (Degrees) (Positive is out, Negative is in): -5.5
Toe (Degrees) (Specify Toe in or out): 2.5 out
Caster (Degrees): 0
Kick-up (mm): 0
Sway Bar (yes/no): no
Ride Height (mm): 3.5mm
Springs (indicate type, length, hardness, etc): Vertex 31mm Blue Progressive
Damper Oil (indicate weight or #): DMC Special Soup
Upper Damper Position (Lower # indicates inner most position): 4
Lower Damper Position (Lower # indicates inner most position): 1 (wide)
Other (Weights, Mods, etc):

Drivetrain
Front Belt (mm or teeth): Stock
Rear Belt (mm or teeth): Stock
Front Pulley (teeth and differential type): 40
Front Center Pulley (teeth and differential type): 14
Rear Center Pulley (teeth and differential type): 20
Rear Pulley (teeth and differential type): 22

Gearing
Spur (teeth and pitch): 120
Pinion (teeth and pitch): 37



** Pictures coming soon