I would also suggest one other method. Instead of purchasing either.... I used my current posts which came with the plastic rockers that the body sits on. I measured, measured, cut, measured again cut again a little at a time to make sure I didn't go to far. What I did was I cut the posts level with the rests and put velcro on those plastic rests and velcro on the body. I will have to replace the posts with something else in the future but I didn't have to buy anything to get the same mounting style today. (the velcro will add a bit of height)
Plastic rockers like in the pic below.
![[Image: CapricornFrontBodyMount.jpg]](http://www.redrc.net/wp-content/uploads/2013/06/CapricornFrontBodyMount.jpg)
(05-14-2014, 02:23 PM)razar Wrote: [ -> ]I would also suggest one other method. Instead of purchasing either.... I used my current posts which came with the plastic rockers that the body sits on. I measured, measured, cut, measured again cut again a little at a time to make sure I didn't go to far. What I did was I cut the posts level with the rests and put velcro on those plastic rests and velcro on the body. I will have to replace the posts with something else in the future but I didn't have to buy anything to get the same mounting style today. (the velcro will add a bit of height)
Plastic rockers like in the pic below.
Thats a really good idea. I will do that on my MST. Pretty clever idea.
Can I get a link
To
The eagle racing body mounts? I just ordered the r31 rwd and would like to
The mounts for it