MyBB Internal: One or more warnings occurred. Please contact your administrator for assistance.
MyBB Internal: One or more warnings occurred. Please contact your administrator for assistance.
MyBB Internal: One or more warnings occurred. Please contact your administrator for assistance.
MyBB Internal: One or more warnings occurred. Please contact your administrator for assistance.
MyBB Internal: One or more warnings occurred. Please contact your administrator for assistance.
DriftMission RC Drift Forums - Your Home for RC Drifting! - MST MS01D 2.57 CS

DriftMission RC Drift Forums - Your Home for RC Drifting!

Full Version: MST MS01D 2.57 CS
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3
RC Drift Chassis Information
Manufacturer:MST
Model:MS01D
Track Surface:Polished Concrete/Carpet
Tires:Competition Series F2/Spice 011
Motor and ESC:Speed Passion Sensored 10.5T/Hobbywing 60Amp Xerun
Servo:Savox 1251MG

Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in):-10
Toe (Degrees) (Specify Toe in or out):0
Caster angle (Degrees):14
Kick-up (mm): 0
Sway Bar (yes/no): No
Ride Height (mm): 10mm
Springs (indicate type, length, hardness, etc):30mm blue soft
Damper Oil (indicate weight or #): Team Losi #25
Upper Damper Position (Lower # indicates inner most position):Closest hole to center
Lower Damper Position (Lower # indicates inner most position):Furthest hole from centre
Other (Weights, Mods, etc): Front one way

Rear Setup
Camber (Degrees) (Positive is out, Negative is in):-5
Toe (Degrees) (Specify Toe in or out):0
Caster (Degrees): 0
Kick-up (mm): 0
Sway Bar (yes/no): No
Ride Height (mm): 10mm
Springs (indicate type, length, hardness, etc):Street Jam Progressive, 29.5mm, Soft
Damper Oil (indicate weight or #): Team Losi #25
Upper Damper Position (Lower # indicates inner most position): Center of optional holes
Lower Damper Position (Lower # indicates inner most position): Furthest from centre
Other (Weights, Mods, etc): Spool

Drivetrain
Front Belt (mm or teeth):Standard
Rear Belt (mm or teeth): Standard
Front Pulley (teeth and differential type): 40
Front Center Pulley (teeth and differential type): 10
Rear Center Pulley (teeth and differential type):18
Rear Pulley (teeth and differential type): 28

Gearing
Spur (teeth and pitch): 88
Pinion (teeth and pitch):22

I have only had this chassis about 2 weeks and I'm loving it. I have plans to up the cs ratio to 2.7 but it's good for now. I'll eventually get the bling bits (carbon and alloy) but I'm in no real hurry. I have real bad chatter at full lock after installing the steering crank from the vip model, so I'm now waiting on the 60 degree pro CVD's.

[Image: photo1-12_zpsc01eff0f.jpg][Image: photo2-13_zps1969f605.jpg][Image: photo3-11_zpsf4e8849e.jpg][Image: cs_zps9d73e30f.png]
Nice!!! I'm thinking of getting the VIP this weekend. How do you like it?
ive driven a few of these from rtr-vip. there very good chassis. they almost cannot be beat for the money. one of these in pro form actually took our comp overall.
What is the rear pulley from? and just noticed your FDR is around 9 you like it this way?
(02-12-2013, 07:06 AM)Tito2102 Wrote: [ -> ]Nice!!! I'm thinking of getting the VIP this weekend. How do you like it?

It's really good! A massive step up from my last chassis, sakura zero 1.74 CS

I'm not sure, was on the chassis when I got it. I thought the FDR was 6.2? How did you get 9?


[Image: eldtma.jpg]
[Image: 17r0wj.jpg]
Ok, I see. Where can I find that calculator? Thanks for the heads up.
You can find the calculator on the Driftmission website under the tools section.
I found it, thanks. I was using a cs calculator I got on the apple app store, I wonder why they FDR isn't right? I thought it would be pretty reliable.
I've used it as well. It's just calculated in a different way
Pages: 1 2 3