Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Latest Threads

Search Forums

(Advanced Search)

 
  Stalwart's TA05-WTF
Posted by: Stalwart - 11-04-2012, 10:18 AM - Forum: Countersteer Setups - No Replies

RC Drift Chassis Information
Manufacturer: Tamiya
Model: TA05-VDF Gold Edition
Track Surface: carpet, concrete, tiles, tarmac...
Tires: R2 T-Drift slicks
Motor and ESC: Trinity Pulse 10.5T on Novak GTB 1st gen
Servo: Savox SC-1257TG

Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): 2*
Toe (Degrees) (Specify Toe in or out): few degress out (i have no gauge)
Caster angle (Degrees): 4*
Kick-up (mm): 2mm
Sway Bar (yes/no): no
Ride Height (mm): 7mm
Springs (indicate type, length, hardness, etc): Eagle Soft
Damper Oil (indicate weight or #): Slippin' It 60
Upper Damper Position (Lower # indicates inner most position): 4/4
Lower Damper Position (Lower # indicates inner most position): 2/4
Other (Weights, Mods, etc): removed belt tensioner, TA05 rear shock tower with body posts, bumper replaced with custom battery support, the rest is in the parts list.

Rear Setup
Camber (Degrees) (Positive is out, Negative is in): 0*
Toe (Degrees) (Specify Toe in or out): 2.5* (stock)
Caster (Degrees): wat?
Kick-up (mm): 0*
Sway Bar (yes/no): no
Ride Height (mm): 13mm
Springs (indicate type, length, hardness, etc): Eagle Super Soft
Damper Oil (indicate weight or #): Slippin' It 60
Upper Damper Position (Lower # indicates inner most position): 2/4
Lower Damper Position (Lower # indicates inner most position): 1/5
Other (Weights, Mods, etc): Removed battery mount and belt tensioners, the rest is in the parts list

Drivetrain
Front Belt (mm or teeth): 74T 222mm
Rear Belt (mm or teeth): 158T 474mm
Front Pulley (teeth and differential type): 40T, oneway
Front Center Pulley (teeth and differential type): 16T
Rear Center Pulley (teeth and differential type): 22T
Rear Pulley (teeth and differential type): 30T, spool

Gearing
Spur (teeth and pitch): 96T 48P
Pinion (teeth and pitch): 22T 48P

Parts list
Front one-way unit: Tamiya TA05 Front One-Way Unit (#53833)
Front swingshafts: Overdose OD1040
Front steering turnbuckles: Kazama M3x20mm (01081320)
Rear spool 30T pulley: Square SVD-330G
Front oneway 40T pulley: Square STA-102
Center shaft front 16T pulley: Tamiya TA05 Center Pulley (#51213)
Center shaft rear 22T pulley: 3Racing SAK-07C
Front 74T belt: Square SVD-174F
Rear 158T belt: Stock
Rear belt tensioner: Eagle 3860P14
CS Ratio: (40/16)/(30/22) = 83,3%
Spur gear: 96T 48P Xenon Racing
Pinion gear: 22T 48P Yokomo
FDR: 6.0
Springs: Tamiya Tuned Spring Set (#53333) + Eagle Racing #1954 + TT01 stock
Spring retainers: TRF Large diameter (#42192)
Damper upgrades: TRF Low friction parts (#53918)
Body mounts: HPI #85002
Steering knuckle extenders: Active STR092-4

ESC: Novak GTB (#1710)
Motor: Trinity Pulse 10.5T (TRI10412)
Servo: Savox SC-1257TG
Batteries: 2 x Fusion short 2S 60C 4000mAh
Charger: IMAX B6 clone
Radio: FlySky FS-GT3B

Pics & videos
Kit build video




First prototype of front battery conversion
[Image: B275C8C7-0B43-4575-AF34-83429CCEF938.jpg]

First shakedown after conversion




First tsuiso practice after conversion (AE86 body)




The point of no return, front battery conversion rocks!



[Image: AzdY2FBCAAAu975.jpg:large]

Another trophy!
[Image: A1ua0DSCIAAFXEQ.jpg:large]

Replaced Turnigys with smaller and lighter Fusions. This is my current setup.
[Image: 6fhr]

Current weight distribution.
[Image: 4n8b]

Weight of fully equipped car, as being run on competitions.
[Image: dnen]

Got 1st prize on last competition. Best drivers from Latvia and Lithuania participated.
[Image: A3ZqTsbCMAEu8eU.jpg:large]

Print this item

  Yokomo DPM
Posted by: robb41488 - 11-04-2012, 09:38 AM - Forum: Yokomo - Replies (18)

This is the discussion about the YOKOMO DPM !

Yokomo DPM
[Image: dp-dpms.jpg]


Sorry about the deletion of posts. The forums bugs are still being worked out

Print this item

  Stalwart, mostly sideways
Posted by: Stalwart - 11-04-2012, 07:02 AM - Forum: Introductions - Replies (4)

Computer junkie through teen age, i rediscovered cars in my twenties. After too many years of Quake 2/3 trickjumping, DeFRaG and Warsow, sideways seemed to be the only logical way of driving a vehicle.

Proud owner of E30 and E36
[Image: Agi76z5CIAEAdiH.jpg:large]

Obviously, driving them sideways...




My signature body, NOS Energy Drift R35
[Image: i4uhpidrift024small.jpg]

My hateful TA05-VDF with front battery conversion
[Image: 6fhr]

Sideways too...




Quite successfully, actually...
[Image: AtN_FBF69B2A-6309-422F-95A6-9F6C9ED29DFA.jpg]

Next step is the Open European Championship 2013 next spring ;)

I also wrote Countersteer Calculator for iOS

Print this item

Image Megadrom Geilenkirchen
Posted by: Balu1982 - 11-04-2012, 03:19 AM - Forum: Drift Track Layouts - Replies (10)

Megadrom Geilenkirchen In West Germany

Brand new Track only a few Days old

[Image: 53481_431487710246645_1552769304_o.jpg]

and a Teaser

http://www.youtube.com/watch?v=hL-hwjQc0BA

Print this item

  My 180SX in Progress
Posted by: Balu1982 - 11-04-2012, 02:50 AM - Forum: RC Drift Bodies - Replies (11)

Hi

I wanna show you my 180SX.
Body is painted , Decals are cutting now.

A few Pics from the Taillights.

More Pics coming soon



Front Light
[Image: frorum1aluxl.jpg]

Koukis
[Image: kouki1hiq4n.jpg]

[Image: forum23xurz.jpg]

[Image: forum3vaukr.jpg]


Grüsse Stefan




New pic in the Dark

[Image: dsc_8493hwu14.jpg]




fast 2 Pics thx Rainer for the Koukis
Koukis was a great Deal

[Image: dsc_84956xufz.jpg]

[Image: dsc_849866u5z.jpg]





So

- Scheinwerfer sind drin ( natürlich mit gelber Belecuhtung )
Allerdings nicht TOP verklebt, da ich diese evtl noch gegen einen
geffnetem und einem geschlossenen austauschen werde.

- Blinker sind auch fertig
Dort befindet sich ne Streuscheibe, hinter der Karosse ,mit passendem
Reflektor für die 3mm Led ´s.


Mirrors are painted.
Plate black and the rest Silver.


[Image: dsc_8511w6u3n.jpg]


[Image: dsc_8512awu0t.jpg]

Cage is done.


[Image: dsc_85149eu3e.jpg]
[Image: dsc_8517yru5b.jpg]
[Image: dsc_851888unl.jpg]





Wheels updated

Lock Nuts in silver

Nuts in Gold

[Image: dsc_8524thutv.jpg]
[Image: dsc_8521pcuxj.jpg]


Something NEW


[Image: dsc_85583pbcl.jpg]
[Image: dsc_8559s0x6k.jpg]
[Image: dsc_8562vjxt2.jpg]
[Image: dsc_85642iai3.jpg]
[Image: dsc_8569h9ak7.jpg]

[Image: dsc_85787ab6h.jpg]

Print this item

  Greetings from Germany
Posted by: Balu1982 - 11-04-2012, 01:40 AM - Forum: Introductions - Replies (4)

Hey Guys

My name is Stefan and I am 30 years old.
I come from Germany from the nice city Mönchengladbach, on the border as the Netherlands.

I ´m drifting for several years.

Print this item

  Hi everyone!!
Posted by: lok519 - 11-04-2012, 01:20 AM - Forum: Introductions - Replies (3)

Hi everyone!! I'm Lok and I have been into drift about a year.
Right now I am having two chassis: yokomo DM type B and StreetJam Zeon MarkIII, both of them are running on cs radio 1.5!

Just can't wait to share more info about my cars with people who has the same chassis with me!!

Print this item

  hello from Qatar
Posted by: howse - 11-04-2012, 01:13 AM - Forum: Introductions - Replies (3)

HI,

I'm a Canadian living in Qatar,

Currently using a Tamiya VDF with a 1.4cs, Still putting together my 3Racing Sakura D3....=)

Looking forward to meeting you all.

Print this item

  Hi! Techidiot here, from Singapore
Posted by: Techidiot - 11-04-2012, 12:45 AM - Forum: Introductions - Replies (5)

Hi im Zhixuan, from Singapore.
I am rather new to RC stuff, and it is my love for car that brought me to the world of RC cars,
Previously i started off with an E10 CS 1.8x, then i switched to the OTa-R31, which was modded with a CF conversion,and eventually the R31 FM which im using now. Currently i have an Eagle R31 FM CS2.16, and an R31 carbon conversion for touring.

Print this item

  Is there signatures here ? How'd you put em' ?
Posted by: war_drifter - 11-04-2012, 12:20 AM - Forum: Help Section - Replies (10)

Noob question lol.

Print this item

  Yokomo DP
Posted by: war_drifter - 11-04-2012, 12:16 AM - Forum: Yokomo - Replies (33)

This thread is for the MR4TC-SD DP

Yokomo MR4TC-SD or Drift Package
[Image: Yokomo-110th-Blitz-Dunlop-ER34-Skyline-06.jpg]


Currently I run the Yokomo MR4TC-SD and I like the response of the kit especially because of the torque(since it's shaft-driven).

Print this item

  Tamiya TA-06
Posted by: silverfd3s - 11-03-2012, 10:51 PM - Forum: RC Drift Chassis Picture Gallery - Replies (2)

TA-06 with a few upgrades ;)

[Image: tamiyata06.jpg]

Print this item

Next from INDONESIA with love.....
Posted by: ildivo - 11-03-2012, 10:26 PM - Forum: Introductions - Replies (3)

hiiii guys......

i'm Kenny from Jakarta, Indonesia

now i'm using :
MSTFS01-D
Keyence Taycon Airia
Luxon KG 7,5t
Savox 1251mg
Sanwa M11x

i'm very glad can join and have a discussion with all of u guys...

thx..

Print this item

  Hello from the Philippines !
Posted by: war_drifter - 11-03-2012, 10:17 PM - Forum: Introductions - Replies (3)

Hey guys ! My name's patrick and i'm from the philippines. I'm currently using a Yokomo MR4TC-SD :)

Print this item

  Greetings From Singapore!
Posted by: CTEK121294 - 11-03-2012, 09:57 PM - Forum: Introductions - Replies (3)

Hi all My Name is Clement.

I am from like the title suggest the small little red Dot Called Singapore.

My Chassis are Two RCart CE-RX Project Whitewolfs

One is a CSed Car that I will be posting Soon on the CS setups. B)
It has been Hopped up with Some Kazama goodies. Devil
Running on a CS ratio of 1.46.
The other CERX is relatively stock but its being used for trial in RWD drifting. Still a work in Progress.

Print this item

  Some of my drift car bodies
Posted by: mp3ranger - 11-03-2012, 09:31 PM - Forum: RC Drift Bodies - Replies (5)

[Image: 561500_363888660361707_340387734_n.jpg]

[Image: 37803_363888700361703_1351021884_n.jpg]

[Image: 579833_363888727028367_914000825_n.jpg]

[Image: 190199_365316893552217_593688752_n.jpg]

[Image: 246648_365316956885544_1314637831_n.jpg]

[Image: 547036_363060330444540_149617941_n.jpg]

[Image: 557720_372631562820750_4234103_n.jpg]

[Image: 409014_370854872998419_1870130354_n.jpg]

[Image: 409167_370855126331727_1094224551_n.jpg]

[Image: 249257_370855356331704_1119927880_n.jpg]


[Image: 282328_370855669665006_2018804447_n.jpg]

Print this item

  Hello From Winchester VA
Posted by: mp3ranger - 11-03-2012, 09:10 PM - Forum: Introductions - Replies (6)

Hello my name is Allen Ruble from Winchester, VA . We just started a new club in the area. VA RC DRIFTERS
Here is a link to are facebook page VA RC DRIFTERS
are other club is VA SCALER VA SCALER HOME PAGE

Print this item

  400sc's MST MS01D PRO (update 2.02cs)
Posted by: 400sc - 11-03-2012, 07:37 PM - Forum: Countersteer Setups - Replies (17)

Build Details

Make:MST
Model:MS01D PRO
Track surface:Hard concrete/ Painted wood
Tire:Super Hard
Motor & ESC:Turnigy Track Star 100amp esc, LRP Vector X12 9.5t
Servo:Savox 1251mg

Front

Camber:~ 8*
Toe:0
Caster hubs:N/A
Kickup:0
Caster:MAX
Ride height:~5
Oil:Stock
Springs:MST Gold MED
Other:

Rear

Camber:~3*
Kickup:0
Toe:~1*
Ride height:~5
Oil:2000
Springs:Eagle racing super soft
Other:

Drive Train

Front:40
Center:11/20
Rear:36
Countersteer:2.02

Spur:80
Pinion:31
FDR:5.1

Others:MST steering upgrade with modified hubs for more angle, 3Racing 20t pulley, Removed rear tensioner custom mounted HB cyclone tensioner to retain stock belt

Summary:I'm loving this chassis i have always run TC chassis this is my 1st Drift dedicated chassis and it feels great and i had fun building it!

[Image: P1000675.jpg]
[Image: P1000676.jpg]
[Image: P1000677.jpg]
[Image: P1000680.jpg]
custom mounted tensioner
[Image: P1000678.jpg]
hubs
[Image: P1000681.jpg]
[Image: P1000683.jpg]

Print this item

  Beat up Toyota somethingorother
Posted by: Z71Burb - 11-03-2012, 07:20 PM - Forum: RC Drift Bodies - Replies (9)

The latest look for my drifter...Toyota Exiv(?) I believe it's called...
[Image: drifter003.jpg]

Uploaded with ImageShack.us
[Image: drifter004.jpg]

Uploaded with ImageShack.us
3Racing Disc Brakes...
[Image: discbrakes007.jpg]

Uploaded with ImageShack.us

The front bumper is mounted with magnets for nifty tear-away action!!!
[Image: drifter010.jpg]

Uploaded with ImageShack.us

Print this item

  Hi from Western Australia
Posted by: 400sc - 11-03-2012, 07:13 PM - Forum: Introductions - Replies (3)

Hi guys I'm Andrew from Perth WA

I'm currently running an MST MS01D pro with 1.82 cs and loving it!

Also a part of Westslyders D1:10 we have been working with the owner of an awesome factory building to create an indoor track, Heres a picture of it at the moment around 3-4 weeks in

[Image: 487178_4826201412213_47484600_n.jpg]

good to be on the forums

Print this item

  hey all from melbourne!
Posted by: dharvin - 11-03-2012, 06:13 PM - Forum: Introductions - Replies (2)

Hey, im dharvin and im part of the melbrc drifters. We've got a growing number of drifters here in melbourne. and its good to finally see the driftmission board go up!

Print this item

  Prodigy-D session
Posted by: s.s.louie - 11-03-2012, 05:47 PM - Forum: RC Drift Videos - No Replies

This was filmed by a friend of PD. He is new to editing drift videos so he has been playing around with visual effects






Print this item

  Prodigy-D / DriftMission club meet vids
Posted by: s.s.louie - 11-03-2012, 05:39 PM - Forum: RC Drift Videos - No Replies

We started the Prodigy-D drift club about 4 months ago. Since the first time DriftMisson came out they have played a active role in our club week in and week out everything from track set up to tear down, tech support, and anything you would expect from DM and more... needless to say we are lucky. along the way we have put a few vids together and here they are.

Enjoy!!










Print this item

  supra engine bay
Posted by: trancemanlsg - 11-03-2012, 05:31 PM - Forum: RC Drift Bodies - Replies (4)

what do ya think??



Attached Files Thumbnail(s)
   
Print this item

  hey everyone
Posted by: bigmaus - 11-03-2012, 05:14 PM - Forum: Introductions - Replies (3)

Hey, I'm maurice, 17 years old and I live in The Netherlands.

I drift with a 50/50 X-ray t3/2011
Besides drifting I am also offroading with a Traxxas Slash 4x4.

i make also me own decals for my body'sB)

Print this item

  [3RACING] Sakua D3 cs Sport
Posted by: grandseb - 11-03-2012, 05:12 PM - Forum: Countersteer Setups - No Replies

Chassis introduction: Frame completely of origin

RC Drift Chassis Information
Manufacturer: 3RACING
Model: D3 CS Sport
Track Surface: Smooth concrete
Tires: T-Drift
Motor and ESC: Motor -> feigao 13.5 ESC -> Hobbywing
Servo: S3003

Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -10 ° +0
Toe (Degrees) (Specify Toe in or out): out 0.5
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): medium length 54 m1.2x13.5x31
Damper Oil (indicate weight or #): 300 origin
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):

Rear Setup
Camber (Degrees) (Positive is out, Negative is in): -6 +0
Toe (Degrees) (Specify Toe in or out): in 3
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): supple lenght 54 m1.1x13.5x31
Damper Oil (indicate weight or #): 1200 origine
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):

Drivetrain
Front Belt (mm or teeth): 138
Rear Belt (mm or teeth): 183
Front Pulley (teeth and differential type): 38T
Front Center Pulley (teeth and differential type): 13T
Rear Center Pulley (teeth and differential type): 22T
Rear Pulley (teeth and differential type): 30T

Gearing
Spur (teeth and pitch): 80T 48P
Pinion (teeth and pitch): 19T 48P

Print this item

  Subaru Eagle TA05 GRT
Posted by: s.s.louie - 11-03-2012, 05:11 PM - Forum: RC Drift Videos - No Replies

My Subaru Eagle TA05 GRT @ 2.35 ratio



Print this item

  M7 RE-Amemiya - Eagle TA05 GRT
Posted by: s.s.louie - 11-03-2012, 05:08 PM - Forum: RC Drift Videos - No Replies

This is my M7 RE-Amemiya - Eagle TA05 GRT @ 2.35 ratio


Print this item

  Hello from Southern Ontario!
Posted by: Z71Burb - 11-03-2012, 05:05 PM - Forum: Introductions - Replies (2)

Just sayin hey...and it's about time there was a forum here! I've been reading the homepage for a while now. Always a lot of good info, and stuff to blow money on!

Print this item

  Tamiya TRF415 MSXX MRE
Posted by: Rvelleko - 11-03-2012, 04:51 PM - Forum: 50/50 Setups - Replies (2)

RC Drift Chassis Information
Manufacturer: Tamiya
Model:TRF415 MSXX MRe
Track Surface: Concrete
Tires: R2 Drift
Motor and ESC: EZrun 8.5T / Hobbywing 60Av2
Servo: Bluebird BMS-661DMG+HS Super Fast Digital Servo

Chassis Settings
Front Setup
Camber: -3 °
Toe: 0 °
Caster: 2 °
Kick-up: 0
Sway Bar: No
Ride Height: 10 mm.
Springs: Tamiya Soft (White)
Damper Oil: 250
Upper Damper Position: 2
Lower Damper Position: 3
Other: 25 Grams additional weight on the front

Rear Setup
Camber: -2 °
Toe: 3 ° Toe-in
Kick-up: 1
Sway Bar: No
Ride Height: 8
Springs: Tamiya Super Soft (Orange)
Damper Oil: 400
Upper Damper Position: 2
Lower Damper Position: 2

Drivetrain (Optional)
Front Pulley: 36T Oneway
Front Center Pulley: 16T Direct coupling
Rear Center Pulley: 16T Direct coupling
Rear Pulley: 36T Spool

Gearing
Spur 87T 48dP
Pinion 32T 48dP

[Image: CIMG0415.jpg]

Print this item

Forum Stats

Welcome, Guest
You have to register before you can post on our site.


  

Password
  





Latest Threads

Search Forums

(Advanced Search)



About DriftMission.com - Your Home for RC Drifting

Your home for everything RC Drift! DriftMission.com offers RC Drift news, reviews, guides, chassis, videos, tips, countersteer tools, bodies, builds and more!

Serving up the latest RC Drift content since 2011.