DriftMission RC Drift Forums - Your Home for RC Drifting!
Sakura d4 rwd rear belt too tight - Printable Version

+- DriftMission RC Drift Forums - Your Home for RC Drifting! (https://forum.driftmission.com)
+-- Forum: RC Drift Discussion (https://forum.driftmission.com/Forum-rc-drift-discussion)
+--- Forum: Help Section (https://forum.driftmission.com/Forum-help-section)
+--- Thread: Sakura d4 rwd rear belt too tight (/Thread-sakura-d4-rwd-rear-belt-too-tight)



Sakura d4 rwd rear belt too tight - Retrom - 08-12-2017

I'm not really sure what to do, my newly build d4 has an extremely tight belt no matter what I do, I completely rebuilt the belt system and it's stI'll the same. So tight the wheels won't roll unless you turn them manually. Do they just need to be broken in, because I spent a solid 30 minutes just trying to get them on. They're on the lowest belt tension setting, (I think). Any help is appreciated.


RE: Sakura d4 rwd rear belt too tight - littlemonsta - 08-12-2017

Can you snap a picture?

If you have it in one extreme hole , can you try the other holes.?

Sent from my Lenovo P1a42 using Tapatalk


RE: Sakura d4 rwd rear belt too tight - Retrom - 08-13-2017

I fixed it, the belt is supposed to be a hit tight I guess. The issue was my wheel lugs were too tight lol, took me a full day to figure that out. I just re did the entire rear drive assembly and it seemed to fix everything.


RE: Sakura d4 rwd rear belt too tight - littlemonsta - 08-14-2017

Factory instructions are in middle hole. Belt tension is not high. You can depress it with light pressure from finger.

As long it's fixed all's good.

Sent from my Lenovo P1a42 using Tapatalk