DriftMission RC Drift Forums - Your Home for RC Drifting!
Newbie Questions :s - Printable Version

+- DriftMission RC Drift Forums - Your Home for RC Drifting! (https://forum.driftmission.com)
+-- Forum: RC Drift Discussion (https://forum.driftmission.com/Forum-rc-drift-discussion)
+--- Forum: Help Section (https://forum.driftmission.com/Forum-help-section)
+--- Thread: Newbie Questions :s (/Thread-newbie-questions-s)



Newbie Questions :s - SircaM - 05-05-2018

Hi Guys, im new on RC DRIFT.
So, recent i bought Sakura D4 Black Edition RWD Chassi, but basically is my first project. before i had TT-01 E (i bought complete kit TT 01 XB).
So my questions is:
  1. Atm i have weak motor (Tamiya Super Torque) and weak esc, but next month i wanna buy another motor and esc (this month the money went away =L ), and i install that motor and esc on SAKURA D4 with gyro GC-301, and some weak SERVO. When i change motor/esc/servo, can i do drift correctly? i mean atm i can do only small drift, if i try big curves i lose control.
  2. I need some kit for stearing? or can use original kit at the beginning?
To consider: i run on asphalt.

Sorry for bad english, and thanks in advice.

Cya


RE: Newbie Questions :s - tt01 project - 05-05-2018

(05-05-2018, 05:41 AM)SircaM Wrote:  Hi Guys, im new on RC DRIFT.
So, recent i bought Sakura D4 Black Edition RWD Chassi, but basically is my first project. before i had TT-01 E (i bought complete kit TT 01 XB).
So my questions is:
  1. Atm i have weak motor (Tamiya Super Torque) and weak esc, but next month i wanna buy another motor and esc (this month the money went away =L ), and i install that motor and esc on SAKURA D4 with gyro GC-301, and some weak SERVO. When i change motor/esc/servo, can i do drift correctly? i mean atm i can do only small drift, if i try big curves i lose control.
  2. I need some kit for stearing? or can use original kit at the beginning?
To consider: i run on asphalt.

Sorry for bad english, and thanks in advice.

Cya

Hi there

Go to youtube you will find a lot of information there.
Its more about the wheel set up and alignment and less about the electronics except if you have a bad transmitter receiver set where you have latency.
Here is a good video that will help you.https://www.youtube.com/watch?v=D2dxULP-ArI&t=303s






RE: Newbie Questions :s - SircaM - 05-05-2018

(05-05-2018, 01:28 PM)tt01¬†project Wrote:  
(05-05-2018, 05:41 AM)SircaM Wrote:  Hi Guys, im new on RC DRIFT.
So, recent i bought Sakura D4 Black Edition RWD Chassi, but basically is my first project. before i had TT-01 E (i bought complete kit TT 01 XB).
So my questions is:
  1. Atm i have weak motor (Tamiya Super Torque) and weak esc, but next month i wanna buy another motor and esc (this month the money went away =L ), and i install that motor and esc on SAKURA D4 with gyro GC-301, and some weak SERVO. When i change motor/esc/servo, can i do drift correctly? i mean atm i can do only small drift, if i try big curves i lose control.
  2. I need some kit for stearing? or can use original kit at the beginning?
To consider: i run on asphalt.

Sorry for bad english, and thanks in advice.

Cya

Hi there

Go to youtube you will find a lot of information there.
Its more about the wheel set up and alignment and less about the electronics except if you have a bad transmitter receiver set where you have latency.
Here is a good video that will help you.https://www.youtube.com/watch?v=D2dxULP-ArI&t=303s




i saw this video, but im care about eletronics because their are super weak, i mean my servo is so slow (the original TT01XB servo), transmiter and receptor the same.
i wanna change some parts of sakura d4, but before i want change eletronics, or better fix setup on sakura?