DriftMission RC Drift Forums - Your Home for RC Drifting!
Best front arm for most angle? - Printable Version

+- DriftMission RC Drift Forums - Your Home for RC Drifting! (https://forum.driftmission.com)
+-- Forum: Chassis, Styles, and Product Discussions (https://forum.driftmission.com/Forum-chassis-styles-and-product-discussions)
+--- Forum: Chassis Discussions (https://forum.driftmission.com/Forum-chassis-discussions)
+---- Forum: Yokomo (https://forum.driftmission.com/Forum-yokomo)
+---- Thread: Best front arm for most angle? (/Thread-best-front-arm-for-most-angle)



Best front arm for most angle? - Speed Chaser - 07-22-2018

I own a yokomo type c that has a 1.5 cs setup and i finally decided to look for something that gives me more angle then the stock arms that come with it, not really looking for the bling factor so plastic ones are fine. I was going to just buy the yokomo high angle Type-C front conversion but just incase there is a better setup i figure i would ask


RE: Best front arm for most angle? - MrAkhtar86 - 09-05-2018

You want more steering lock or more drift angle?

Any y-arm would be sufficient for the lower arms. MST plastic HT arms are my favourite. You might also want to look into replacing the knuckles/C-hubs as they may also stop you from achieving higher steering angle.