Forums
Nevuz:yokomo DIB - Printable Version

+- Forums (https://forum.driftmission.com)
+-- Forum: Chassis Setups (https://forum.driftmission.com/forumdisplay.php?fid=4)
+--- Forum: Countersteer Setups (https://forum.driftmission.com/forumdisplay.php?fid=10)
+--- Thread: Nevuz:yokomo DIB (/showthread.php?tid=187)



Nevuz:yokomo DIB - nevuz - 11-05-2012

RC Drift Chassis Information
Manufacturer: Yokomo
Model: DIB
Track Surface: resin,moquette,marble
Tires: different for surface (moquette:tn219y-resin:r2hobbies highpressure-marbleConfusedtreetjam medium)
Motor and ESC: xerun 10.5 & hobbywing xtreme stock
Servo: hitec hs925mg

Chassis Settings
Front Setup
Camber: -8
Toe in: 3 °
Caster: 12
Sway Bar: no
Springs: vertex ultra soft
Damper Oil: 150
Damper Position: vertical


Rear Setup
Camber: -4
Toe: 0*
Caster: 0*
Sway Bar: no
Springs: tn racing progressive super soft
Damper Oil: 150
Damper Position: vertical,with mod
Other (Weights, Mods, etc):weights 140g;additional hole for vertical damper position


Drivetrain

Front Pulley: 40t oneway
Front Center Pulley: 15t
Rear Center Pulley: 15t
Rear Pulley: 20t (2.0 cs kit)

Gearing
Spur: 90t 48p
Pinion: 29t 48p