DriftMission RC Drift Forums - Your Home for RC Drifting!
TT-01D Differential Lock - Printable Version

+- DriftMission RC Drift Forums - Your Home for RC Drifting! (https://forum.driftmission.com)
+-- Forum: Chassis Setups (https://forum.driftmission.com/Forum-chassis-setups)
+--- Forum: 50/50 Setups (https://forum.driftmission.com/Forum-50-50-setups)
+--- Thread: TT-01D Differential Lock (/Thread-tt-01d-differential-lock)



TT-01D Differential Lock - dkw2133 - 05-01-2014

Hi guys, I want to take this TT-01 to the next level by locking the rear differential. What is the best way to do this without breaking it. Some say Blue-Tac, some say 300wt fluid, Help please. Also, in the front, people say add a one-way. Please explain it.

Damien
TT-O1 Toyota 86/Nissan GTR 35


RE: TT-01D Differential Lock - tamiya - 05-01-2014

TT01 diff does not have fluid seals, you cannot use silicone fluid.

BluTac gets loose & needs redoing regularly.
Some ppl stuff it with rags or little rubberbands but that's no different either.


I like to use ShoeGoo. It doesn't need redoing but can be undone
when you need to by washing in solvent thinners.

Pull the diff apart & degrease thoroughly if its a used unit. No need if its brandnew.
Just glue the spidergears to the side bevels... don't let ShoeGoo touch sides of
casing or outdrive shafts & you can remove the glued unit easily.


RE: TT-01D Differential Lock - rudeboy03 - 05-01-2014

just take out one of the 3 small gears and shove it in between the other two gears. itll lock it and is easily reversible.


RE: TT-01D Differential Lock - DaN - 05-23-2014

i always locked the rear diff of the tt01 with hot glue.. hot glue when is cold is easy to get out so is reversible too..


RE: TT-01D Differential Lock - osncoll_0716@icloud.com - 09-16-2014

(05-01-2014, 09:55 AM)tamiya Wrote:  TT01 diff does not have fluid seals, you cannot use silicone fluid.

BluTac gets loose & needs redoing regularly.
Some ppl stuff it with rags or little rubberbands but that's no different either.


I like to use ShoeGoo. It doesn't need redoing but can be undone
when you need to by washing in solvent thinners.

Pull the diff apart & degrease thoroughly if its a used unit. No need if its brandnew.
Just glue the spidergears to the side bevels... don't let ShoeGoo touch sides of
casing or outdrive shafts & you can remove the glued unit easily.
I concur!! Use shoo goo!


RE: TT-01D Differential Lock - santafe17 - 05-23-2017

or you could just get a locking block...


RE: TT-01D Differential Lock - MaMamsYo - 08-17-2017

In my TT02D i just pack my rear diff with thick grease and run a one way up front. I like the way it feels with a diff in.