(11-06-2012, 09:23 PM)pickled Wrote: what's the point off cutting the C-hubs they don't get in the way there's plenty of clearance with the shafts? I'd be more interested to find out if yokomo caster blocks fit I think they go up to 12* or so?
Removing the C-Hub not only allows for more steering angel, but it allows you to do something called King-pin inclination. Which ultimately increases your steering angle even more. It sort of looks like caster but from what I'm reading in the other forums is that it doesn't. MS-01 and FS-01 chassis have this from the factory.
Also to answer your question about the turnknuckles. That's probably what he didn't do. But then again I never never really had to do that either and my turnknuckles adjust nicely. But I will take that into consideration and suggest that to him so he can do it himself. =)
Team Ghost Drift
![[Image: TGD+official+WHITE+side+decal+Osaka-Sans...+edit1.png]](https://lh5.googleusercontent.com/-l_7SoVdAxY4/UMadInFHZLI/AAAAAAAAFXw/7bgT6vbgMZY/s171/TGD+official+WHITE+side+decal+Osaka-Sans_editedSide+edit1.png)
MST FXX-D VIP|MST FXX-D S|MST XXX-D S HT
![[Image: TGD+official+WHITE+side+decal+Osaka-Sans...+edit1.png]](https://lh5.googleusercontent.com/-l_7SoVdAxY4/UMadInFHZLI/AAAAAAAAFXw/7bgT6vbgMZY/s171/TGD+official+WHITE+side+decal+Osaka-Sans_editedSide+edit1.png)
MST FXX-D VIP|MST FXX-D S|MST XXX-D S HT