Totally rookie to RC drifting. Wanted to start a budget RC drift build after many years of track-racing irl.
Ordered a Sakura D4 RWD to make a clone of my old Skyline GT-R34. After the first night of assembling the upgrade devil made an approach....
For now the car has;
- Boom racing front and rear knuckles
- Boom racing steering
- Boom racing front and rear bulkhead
- Boom racing front and rear bulkhead cover
- Boom racing castor mount
- 3 racing upper arms
- 3 racing gear ratio
- 3 racing invisible mounts
- 3 racing hex adaptors 5mm and 7mm
- 3 racing servo mount
- 3 racing front single damper
- Carbon fibre upper deck
- Carbon fibre front and rear shock mounts
- Carbon fibre front cover
- Yeah racing aluminium case
- Yeah racing aluminium spur gear support plate
- Metal 48P spur pully gear 92T
Drivetrain;
- Speed passion Reventon R esc
- Speed passion Dokyo drift 10.5 brushless sensored motor
- Slidelogy Gyro
Servo;
- Savöx Sc-1257 digital
Radio;
- Sanwa MT4s
Battery;
- Vant battery 5200 mah LiPo 7.2V
I am in the middle of assembly and have not tested all yet. Why I started the upgrades so soon is because i felt that the original kit lacked some quality of many parts and If i want a car to handle well many of the parts need to be replaced.
(This post was last modified: 08-22-2016, 02:24 PM by Ljungberg.)
Ordered a Sakura D4 RWD to make a clone of my old Skyline GT-R34. After the first night of assembling the upgrade devil made an approach....
For now the car has;
- Boom racing front and rear knuckles
- Boom racing steering
- Boom racing front and rear bulkhead
- Boom racing front and rear bulkhead cover
- Boom racing castor mount
- 3 racing upper arms
- 3 racing gear ratio
- 3 racing invisible mounts
- 3 racing hex adaptors 5mm and 7mm
- 3 racing servo mount
- 3 racing front single damper
- Carbon fibre upper deck
- Carbon fibre front and rear shock mounts
- Carbon fibre front cover
- Yeah racing aluminium case
- Yeah racing aluminium spur gear support plate
- Metal 48P spur pully gear 92T
Drivetrain;
- Speed passion Reventon R esc
- Speed passion Dokyo drift 10.5 brushless sensored motor
- Slidelogy Gyro
Servo;
- Savöx Sc-1257 digital
Radio;
- Sanwa MT4s
Battery;
- Vant battery 5200 mah LiPo 7.2V
I am in the middle of assembly and have not tested all yet. Why I started the upgrades so soon is because i felt that the original kit lacked some quality of many parts and If i want a car to handle well many of the parts need to be replaced.