Sakura D4 weight shift
Sakura D4 weight shift
RC Drift Chassis Information
Manufacturer: 3RACING
Model: SAKURA D4 RWD
Track Surface:
Motor and ESC:
Servo:
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -8
Toe (Degrees) (Specify Toe in or out): -2
Caster (Degrees): -15
King Pin Angle (Degrees): 6
Kick-up (mm): 0.5MM
Sway Bar (yes/no): NO
Ride Height (mm): 8MM
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #): TEAM ASSOCIATED 10WT
Upper Damper Position (Lower # indicates inner most position): MOST OUTER
Lower Damper Position (Lower # indicates inner most position): MOST INNER
Front Tires (Type): MST FR-F MEDIUM
Other (Weights, Mods, anything else that can effect performance): MST FXX HUBS,3RACING SPORT BRAKE CALIPER SET,3RACING BLACK SLIDE RACK,sakura d3 front axle(wide angle)
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): 1
Toe (Degrees) (Specify Toe in or out): 2
Caster (Degrees): 0
Kick-up (mm): a litlle pro-squat
Sway Bar (yes/no): no
Ride Height (mm): 9
Springs (indicate type, length, hardness, etc): speedline progressive hard
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position): 2 holes inside from outer position
Lower Damper Position (Lower # indicates inner most position): most outer(suspension arms revesred)
Rear Tires (Type): raikou dp20
Other (Weights, Mods, anything else that can effect performance): Oxygen motor mount,4mm spacers for the rear turnbuckle on the hub(photo),sakura d3 rear diffuser,40grams weight on the diffuser
Drivetrain
Rear Drive Ratio:
Gearing
Spur (teeth and pitch): 92t 48p
Pinion (teeth and pitch): 24t 48p
Gyro
Type: yhea racing cg301
photos are coming!
This is my Sakura D4.I had a d3 which i modded for rwd but when i saw the d4 i knew i wanted it.i was always admiring the guys using the d-like chassis.always realistic driving and realistic behaviour,so i wanted to achieve stg similar since i cant afford the chassis.i am slowly trying new weight shifting mods.
RC Drift Chassis Information
Manufacturer: 3RACING
Model: SAKURA D4 RWD
Track Surface:
Motor and ESC:
Servo:
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -8
Toe (Degrees) (Specify Toe in or out): -2
Caster (Degrees): -15
King Pin Angle (Degrees): 6
Kick-up (mm): 0.5MM
Sway Bar (yes/no): NO
Ride Height (mm): 8MM
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #): TEAM ASSOCIATED 10WT
Upper Damper Position (Lower # indicates inner most position): MOST OUTER
Lower Damper Position (Lower # indicates inner most position): MOST INNER
Front Tires (Type): MST FR-F MEDIUM
Other (Weights, Mods, anything else that can effect performance): MST FXX HUBS,3RACING SPORT BRAKE CALIPER SET,3RACING BLACK SLIDE RACK,sakura d3 front axle(wide angle)
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): 1
Toe (Degrees) (Specify Toe in or out): 2
Caster (Degrees): 0
Kick-up (mm): a litlle pro-squat
Sway Bar (yes/no): no
Ride Height (mm): 9
Springs (indicate type, length, hardness, etc): speedline progressive hard
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position): 2 holes inside from outer position
Lower Damper Position (Lower # indicates inner most position): most outer(suspension arms revesred)
Rear Tires (Type): raikou dp20
Other (Weights, Mods, anything else that can effect performance): Oxygen motor mount,4mm spacers for the rear turnbuckle on the hub(photo),sakura d3 rear diffuser,40grams weight on the diffuser
Drivetrain
Rear Drive Ratio:
Gearing
Spur (teeth and pitch): 92t 48p
Pinion (teeth and pitch): 24t 48p
Gyro
Type: yhea racing cg301
photos are coming!
(05-15-2017, 08:34 PM)STEVETC5R This is my Sakura D4.I had a d3 which i modded for rwd but when i saw the d4 i knew i wanted it.i was always admiring the guys using the d-like chassis.always realistic driving and realistic behaviour,so i wanted to achieve stg similar since i cant afford the chassis.i am slowly trying new weight shifting mods.
RC Drift Chassis Information
Manufacturer: 3RACING
Model: SAKURA D4 RWD
Track Surface:
Motor and ESC:
Servo:
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -8
Toe (Degrees) (Specify Toe in or out): -2
Caster (Degrees): -15
King Pin Angle (Degrees): 6
Kick-up (mm): 0.5MM
Sway Bar (yes/no): NO
Ride Height (mm): 8MM
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #): TEAM ASSOCIATED 10WT
Upper Damper Position (Lower # indicates inner most position): MOST OUTER
Lower Damper Position (Lower # indicates inner most position): MOST INNER
Front Tires (Type): MST FR-F MEDIUM
Other (Weights, Mods, anything else that can effect performance): MST FXX HUBS,3RACING SPORT BRAKE CALIPER SET,3RACING BLACK SLIDE RACK,sakura d3 front axle(wide angle)
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): 1
Toe (Degrees) (Specify Toe in or out): 2
Caster (Degrees): 0
Kick-up (mm): a litlle pro-squat
Sway Bar (yes/no): no
Ride Height (mm): 9
Springs (indicate type, length, hardness, etc): speedline progressive hard
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position): 2 holes inside from outer position
Lower Damper Position (Lower # indicates inner most position): most outer(suspension arms revesred)
Rear Tires (Type): raikou dp20
Other (Weights, Mods, anything else that can effect performance): Oxygen motor mount,4mm spacers for the rear turnbuckle on the hub(photo),sakura d3 rear diffuser,40grams weight on the diffuser
Drivetrain
Rear Drive Ratio:
Gearing
Spur (teeth and pitch): 92t 48p
Pinion (teeth and pitch): 24t 48p
Gyro
Type: yhea racing cg301
photos are coming!
im in the same path regarding d-like chassis. I recently had a big path of upgrade on my D4, which includes overslide battery rack for high center gravity & aluminum suspension block for better rigidity. cant wait to see how the behavior changes. my next plan would be getting D-like F&R knuckles for VX-suspension setup.
(05-15-2017, 08:34 PM)STEVETC5R This is my Sakura D4.I had a d3 which i modded for rwd but when i saw the d4 i knew i wanted it.i was always admiring the guys using the d-like chassis.always realistic driving and realistic behaviour,so i wanted to achieve stg similar since i cant afford the chassis.i am slowly trying new weight shifting mods.
RC Drift Chassis Information
Manufacturer: 3RACING
Model: SAKURA D4 RWD
Track Surface:
Motor and ESC:
Servo:
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -8
Toe (Degrees) (Specify Toe in or out): -2
Caster (Degrees): -15
King Pin Angle (Degrees): 6
Kick-up (mm): 0.5MM
Sway Bar (yes/no): NO
Ride Height (mm): 8MM
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #): TEAM ASSOCIATED 10WT
Upper Damper Position (Lower # indicates inner most position): MOST OUTER
Lower Damper Position (Lower # indicates inner most position): MOST INNER
Front Tires (Type): MST FR-F MEDIUM
Other (Weights, Mods, anything else that can effect performance): MST FXX HUBS,3RACING SPORT BRAKE CALIPER SET,3RACING BLACK SLIDE RACK,sakura d3 front axle(wide angle)
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): 1
Toe (Degrees) (Specify Toe in or out): 2
Caster (Degrees): 0
Kick-up (mm): a litlle pro-squat
Sway Bar (yes/no): no
Ride Height (mm): 9
Springs (indicate type, length, hardness, etc): speedline progressive hard
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position): 2 holes inside from outer position
Lower Damper Position (Lower # indicates inner most position): most outer(suspension arms revesred)
Rear Tires (Type): raikou dp20
Other (Weights, Mods, anything else that can effect performance): Oxygen motor mount,4mm spacers for the rear turnbuckle on the hub(photo),sakura d3 rear diffuser,40grams weight on the diffuser
Drivetrain
Rear Drive Ratio:
Gearing
Spur (teeth and pitch): 92t 48p
Pinion (teeth and pitch): 24t 48p
Gyro
Type: yhea racing cg301
photos are coming!
im in the same path regarding d-like chassis. I recently had a big path of upgrade on my D4, which includes overslide battery rack for high center gravity & aluminum suspension block for better rigidity. cant wait to see how the behavior changes. my next plan would be getting D-like F&R knuckles for VX-suspension setup.
I already ahev tons of ugrade parts for it but will slowly add them as I continue to mod it. I still have a lot of tweaking to get it to where I can drive it.
I have a fully optioned D3 CS Sport with all kinds of mods that I love driving!
Sent from my SM-N935S using Tapatalk
I am on the D4 RWD boat...I bought ever since it first came out but have been so budy. I just finally finished building it stock. I found the stock steering components too sloppy. I upgraded to BoomRacing alum parts and took the slop out.
I already ahev tons of ugrade parts for it but will slowly add them as I continue to mod it. I still have a lot of tweaking to get it to where I can drive it.
I have a fully optioned D3 CS Sport with all kinds of mods that I love driving!
Sent from my SM-N935S using Tapatalk