Exceed RC Drift King Brushed edition

Pages (2): 1 2 Next

PaintN'Body1996
Junior Member

07-29-2013, 05:59 PM

I have an Exceed RC DK Brushed edition and I have have no complaints other than the esc and switch coming loose, other than that its pretty fun to play with it. I'm just looking for tips for the 50/50 setup and was wondering what should I upgrade to help the car drift better? Any suggestions would be greatly appreciated.

PaintN'Body1996

07-29-2013, 05:59 PM #1

RCPHREEK
I AM THE PHREEK!!

1,257

07-30-2013, 07:14 AM

and also can lock up the rear diff......as far as other upgrades well I think the stock chassis does well as it is Smile

imo

This post was last modified: 07-30-2013, 07:17 AM by RCPHREEK.

>SCREW IT, DONT NEED NO FANCY SIG<

RCPHREEK

07-30-2013, 07:14 AM #2

I have the drift star, love it, it's currently rwd, but as for the 50/50 I think a great setup is stiffer rear shocks and springs, and lighter up front, and u can also get the high angle Cvds and do the steering lock mod and it will allow u to get more angle on your drifts Smile and also can lock up the rear diff......as far as other upgrades well I think the stock chassis does well as it is Smile imo

>SCREW IT, DONT NEED NO FANCY SIG<

PaintN'Body1996
Junior Member

07-30-2013, 09:36 AM

(07-30-2013, 07:14 AM)RCPHREEK I have the drift star, love it, it's currently rwd, but as for the 50/50 I think a great setup is stiffer rear shocks and springs, and lighter up front, and u can also get the high angle Cvds and do the steering lock mod and it will allow u to get more angle on your drifts and also can lock up the rear diff......as far as other upgrades well I think the stock chassis does well as it is imo

Thanks for the advice. Do you know where I can get the steering lock mod? Or is it something that I can do like locking the diff?

PaintN'Body1996

07-30-2013, 09:36 AM #3

(07-30-2013, 07:14 AM)RCPHREEK I have the drift star, love it, it's currently rwd, but as for the 50/50 I think a great setup is stiffer rear shocks and springs, and lighter up front, and u can also get the high angle Cvds and do the steering lock mod and it will allow u to get more angle on your drifts and also can lock up the rear diff......as far as other upgrades well I think the stock chassis does well as it is imo

Thanks for the advice. Do you know where I can get the steering lock mod? Or is it something that I can do like locking the diff?

RCPHREEK
I AM THE PHREEK!!

1,257

07-30-2013, 11:15 AM

Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

>SCREW IT, DONT NEED NO FANCY SIG<

RCPHREEK

07-30-2013, 11:15 AM #4

Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

>SCREW IT, DONT NEED NO FANCY SIG<

PaintN'Body1996
Junior Member

07-30-2013, 11:44 AM

(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.

PaintN'Body1996

07-30-2013, 11:44 AM #5

(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.

RCPHREEK
I AM THE PHREEK!!

1,257

07-31-2013, 11:09 PM

(07-30-2013, 11:44 AM)PaintNBody1996
(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.

No prob:

: good luck

This post was last modified: 07-31-2013, 11:09 PM by RCPHREEK.

>SCREW IT, DONT NEED NO FANCY SIG<

RCPHREEK

07-31-2013, 11:09 PM #6

(07-30-2013, 11:44 AM)PaintNBody1996
(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.

No prob:

: good luck

>SCREW IT, DONT NEED NO FANCY SIG<

PaintN'Body1996
Junior Member

08-03-2013, 08:23 PM

(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996
(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

I see you mentioned that your car is rwd. To get that do you just remove the shaft? (ikniw this isnt the thread for it) I tried that to see what would happen and just spun and didn't get anywhere.

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996
(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

I see you mentioned that your car is rwd. To get that do you just remove the shaft? (iknow this isnt the thread for it and that was a noob question) I tried that to see what would happen and just spun and didn't get anywhere.

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

This post was last modified: 08-03-2013, 09:18 PM by PaintN'Body1996.

PaintN'Body1996

08-03-2013, 08:23 PM #7

(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996
(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

I see you mentioned that your car is rwd. To get that do you just remove the shaft? (ikniw this isnt the thread for it) I tried that to see what would happen and just spun and didn't get anywhere.

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996
(07-30-2013, 11:15 AM)RCPHREEK Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

I see you mentioned that your car is rwd. To get that do you just remove the shaft? (iknow this isnt the thread for it and that was a noob question) I tried that to see what would happen and just spun and didn't get anywhere.

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

(08-03-2013, 08:23 PM)PaintNBody1996
(07-31-2013, 11:09 PM)RCPHREEK
(07-30-2013, 11:44 AM)PaintNBody1996 [quote='RCPHREEK' pid='20992' dateline='1375182901']
Well idk about parts for these things I just did a lock mod myself.....it's in this thread,
http://forum.driftmission.com/Thread-wha...ff17qN5mSM

Ok, I get the idea now. Thanks a lot, much is appreciated.
No prob:: good luck

davidsmunoz
DamageD

401

08-04-2013, 01:59 AM

I have a redcat. What i did is take apart my rear diff and cleaned it and let dry. As i put the peices together i used jb weld to lock everything inside. Glued it permanenty because there will be no regret. Let it dry naturally for a few hours and you will be ready to rock. ... i also added some weight on front bumper and made major improvemen[/i]t.

davidsmunoz

08-04-2013, 01:59 AM #8

Mackiv
Member

115

08-12-2013, 07:13 AM

If u lock yur rear diff in yur red cat youll wanna think about locin your front as well or even getting a front one way diff. W/ a slip diff in the front and locked in the back u might spin out too much. W/ the front locked youll lose a little lock but u can get it back w/ the lock mods.

Mackiv

08-12-2013, 07:13 AM #9

RCPHREEK
I AM THE PHREEK!!

1,257

08-14-2013, 09:42 PM

#10

If u lock only the rear it does tend to over steer easy, I just tightened up the rear susp a lil and it helped!!

This post was last modified: 08-18-2013, 03:14 AM by RCPHREEK.

>SCREW IT, DONT NEED NO FANCY SIG<

RCPHREEK

08-14-2013, 09:42 PM #10

If u lock only the rear it does tend to over steer easy, I just tightened up the rear susp a lil and it helped!!

>SCREW IT, DONT NEED NO FANCY SIG<

Pages (2): 1 2 Next

Users browsing this thread:
1 Guest(s)