50/50 Setup Template
50/50 Setup Template
RC Drift Chassis Information
Manufacturer:
Model:
Track Surface:
Tires:
Motor and ESC:
Servo:
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in):
Toe (Degrees) (Specify Toe in or out):
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm):
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):
Rear Setup
Camber (Degrees) (Positive is out, Negative is in):
Toe (Degrees) (Specify Toe in or out):
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm):
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):
Drivetrain (Optional)
Front Belt (mm or teeth):
Rear Belt (mm or teeth):
Front Pulley (teeth and differential type):
Front Center Pulley (teeth and differential type):
Rear Center Pulley (teeth and differential type):
Rear Pulley (teeth and differential type):
Gearing
Spur (teeth and pitch):
Pinion (teeth and pitch):
![[Image: dmsig02.jpg]](http://i1134.photobucket.com/albums/m620/driftmission/dmsig02.jpg)
driftmission
10-27-2012, 06:24 AM #1Chassis introduction: (Tell everyone about your chassis)
RC Drift Chassis Information
Manufacturer:
Model:
Track Surface:
Tires:
Motor and ESC:
Servo:
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in):
Toe (Degrees) (Specify Toe in or out):
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm):
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):
Rear Setup
Camber (Degrees) (Positive is out, Negative is in):
Toe (Degrees) (Specify Toe in or out):
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):
Ride Height (mm):
Springs (indicate type, length, hardness, etc):
Damper Oil (indicate weight or #):
Upper Damper Position (Lower # indicates inner most position):
Lower Damper Position (Lower # indicates inner most position):
Other (Weights, Mods, etc):
Drivetrain (Optional)
Front Belt (mm or teeth):
Rear Belt (mm or teeth):
Front Pulley (teeth and differential type):
Front Center Pulley (teeth and differential type):
Rear Center Pulley (teeth and differential type):
Rear Pulley (teeth and differential type):
Gearing
Spur (teeth and pitch):
Pinion (teeth and pitch):
Manufacturer:MST
Model:MS-01D Pro
Track Surface: Rough Asphalt/Cracked driveway/ clay tennis court
Tires:Raikou D70, MST kit set
Motor and ESC:Flux vapor system 5900 kv
Servo:Spektrum S6040 (borrowed, getting rc omg bf or cf soon)
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -6
Toe (Degrees) (Specify Toe in or out):1 in
Caster angle (Degrees):10
Kick-up (mm): stock
Sway Bar (yes/no):no
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): MST aluminum threaded with alumin spring stays
Damper Oil (indicate weight or #):30w
Upper Damper Position (Lower # indicates inner most position): 2
Lower Damper Position (Lower # indicates inner most position):1
Other (Weights, Mods, etc): aluminum steering assembly
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): -4
Toe (Degrees) (Specify Toe in or out): 4 ish out
Caster (Degrees):10
Kick-up (mm): stick
Sway Bar (yes/no):no
Ride Height (mm): 5mm
Springs (indicate type, length, hardness, etc):Stock
Damper Oil (indicate weight or #): 30
Upper Damper Position (Lower # indicates inner most position):2
Lower Damper Position (Lower # indicates inner most position):2
Other (Weights, Mods, etc):
Drivetrain
Front Belt (mm or teeth):228mm
Rear Belt (mm or teeth)
tockFront Pulley (teeth and differential type):36t fow
Front Center Pulley (teeth and differential type):18t
Rear Center Pulley (teeth and differential type):18t
Rear Pulley (teeth and differential type):36t aluminum spool
Gearing
Spur (teeth and pitch):90t 64p
Pinion (teeth and pitch): 23t 64p (about to put on 16t)
TraneDrift
01-03-2015, 09:07 PM #2RC Drift Chassis Information
Manufacturer:MST
Model:MS-01D Pro
Track Surface: Rough Asphalt/Cracked driveway/ clay tennis court
Tires:Raikou D70, MST kit set
Motor and ESC:Flux vapor system 5900 kv
Servo:Spektrum S6040 (borrowed, getting rc omg bf or cf soon)
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -6
Toe (Degrees) (Specify Toe in or out):1 in
Caster angle (Degrees):10
Kick-up (mm): stock
Sway Bar (yes/no):no
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): MST aluminum threaded with alumin spring stays
Damper Oil (indicate weight or #):30w
Upper Damper Position (Lower # indicates inner most position): 2
Lower Damper Position (Lower # indicates inner most position):1
Other (Weights, Mods, etc): aluminum steering assembly
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): -4
Toe (Degrees) (Specify Toe in or out): 4 ish out
Caster (Degrees):10
Kick-up (mm): stick
Sway Bar (yes/no):no
Ride Height (mm): 5mm
Springs (indicate type, length, hardness, etc):Stock
Damper Oil (indicate weight or #): 30
Upper Damper Position (Lower # indicates inner most position):2
Lower Damper Position (Lower # indicates inner most position):2
Other (Weights, Mods, etc):
Drivetrain
Front Belt (mm or teeth):228mm
Rear Belt (mm or teeth)tock
Front Pulley (teeth and differential type):36t fow
Front Center Pulley (teeth and differential type):18t
Rear Center Pulley (teeth and differential type):18t
Rear Pulley (teeth and differential type):36t aluminum spool
Gearing
Spur (teeth and pitch):90t 64p
Pinion (teeth and pitch): 23t 64p (about to put on 16t)
1 Guest(s)
1 Guest(s)