Diffs diffs diffs
Diffs diffs diffs
04-08-2014, 03:19 AM
Sent from my HTC6435LVW using Tapatalk
SLIDE SIDEWAYS
Follow me on Instagram and Twitter: St_V3ngeance
St_V3ngeance
04-08-2014, 03:19 AM #1I've been looking around and I'm just ugh! Can someone give me the low down on a front one way, a gear diff and ball diff? Which would be the best for drifting? Thanks!!!
Sent from my HTC6435LVW using Tapatalk
SLIDE SIDEWAYS
Follow me on Instagram and Twitter: St_V3ngeance
![[Image: 4028172207455215s.jpg]](http://www.sig-generator.com/banner-maker/banners/4028172207455215s.jpg)
04-08-2014, 08:37 AM
(04-08-2014, 06:46 AM)lougc8 If your drifting CS or 50/50 usually it's front one way diff and rear is locked/spool diff. RWD is either using locked/spool or ball diff.
Amen!
Here's the front-one way diff for your car: http://hpiracing.com/en/part/86042
![[Image: 86042_86042_02p_314_235.jpg]](http://hpiracing.com/assets/images/cache/86042_86042_02p_314_235.jpg)
This will give you an e-brake effect when letting off the gas/braking.
Here's the method I used for locking the Sprint 2 stock rear diff: http://youtu.be/J75I_maZkrk
Worked like a charm. Best of luck!
-K
This post was last modified: 04-08-2014, 04:33 PM by foku5.
(04-08-2014, 06:46 AM)lougc8 If your drifting CS or 50/50 usually it's front one way diff and rear is locked/spool diff. RWD is either using locked/spool or ball diff.
Amen!
Here's the front-one way diff for your car: http://hpiracing.com/en/part/86042
This will give you an e-brake effect when letting off the gas/braking.
Here's the method I used for locking the Sprint 2 stock rear diff: http://youtu.be/J75I_maZkrk
Worked like a charm. Best of luck!
-K
04-08-2014, 03:03 PM
is just your way to drive.. oneway will get you slower in the corner.. but is easier to run whit.. diff is a bit harder (not to much) but really funny and faster in the corner..
that's my opinion from my personal experience..
never used a oneway when i was 50/50 in Cs and now in Rwd still using diff ball..
is just your way to drive.. oneway will get you slower in the corner.. but is easier to run whit.. diff is a bit harder (not to much) but really funny and faster in the corner..
that's my opinion from my personal experience..
06-01-2014, 09:38 PM
Sent from my SCH-I545 using Tapatalk
DELxJCdriftteam
06-01-2014, 09:38 PM #5also wondering if lockimg the front is the same as this one way diff because this item is backordered until mid june. should I lock or should I wait.
Sent from my SCH-I545 using Tapatalk
06-01-2014, 09:54 PM
(06-01-2014, 09:38 PM)DELxJCdriftteam also wondering if lockimg the front is the same as this one way diff because this item is backordered until mid june. should I lock or should I wait.
Sent from my SCH-I545 using Tapatalk
locking both front and rear diffs will not give you the same affect as locked rear, front one-way.
HPI Sprint 2 Flux - full carbon fiber/aluminum upgrades 50/50
HPI Sprint 2 Flux - RWD project
HPI RS4 Sport 3 - carbon fiber/aluminum shelf queen
wareagle84
06-01-2014, 09:54 PM #6(06-01-2014, 09:38 PM)DELxJCdriftteam also wondering if lockimg the front is the same as this one way diff because this item is backordered until mid june. should I lock or should I wait.
Sent from my SCH-I545 using Tapatalk
locking both front and rear diffs will not give you the same affect as locked rear, front one-way.
HPI Sprint 2 Flux - full carbon fiber/aluminum upgrades 50/50
HPI Sprint 2 Flux - RWD project
HPI RS4 Sport 3 - carbon fiber/aluminum shelf queen
06-01-2014, 09:56 PM
thanks. ill try locking the rear first..then just waot until stock comes in on the front one ways. I heard it takes some getting used to for the front one way diffs. thanks.
Sent from my SCH-I545 using Tapatalk
sorry to jack your thread ST_vengeance. but hopefully this info can be useful to you too.
Sent from my SCH-I545 using Tapatalk
This post was last modified: 06-01-2014, 09:57 PM by DELxJCdriftteam.
DELxJCdriftteam
06-01-2014, 09:56 PM #7ok
thanks. ill try locking the rear first..then just waot until stock comes in on the front one ways. I heard it takes some getting used to for the front one way diffs. thanks.
Sent from my SCH-I545 using Tapatalk
sorry to jack your thread ST_vengeance. but hopefully this info can be useful to you too.
Sent from my SCH-I545 using Tapatalk
06-01-2014, 10:02 PM
HPI Sprint 2 Flux - full carbon fiber/aluminum upgrades 50/50
HPI Sprint 2 Flux - RWD project
HPI RS4 Sport 3 - carbon fiber/aluminum shelf queen
wareagle84
06-01-2014, 10:02 PM #8definitely lock the rear. you may find that you really like stock front/locked rear.
HPI Sprint 2 Flux - full carbon fiber/aluminum upgrades 50/50
HPI Sprint 2 Flux - RWD project
HPI RS4 Sport 3 - carbon fiber/aluminum shelf queen
![[Image: 9121590828_f56a93fe31_o.jpg]](http://farm3.staticflickr.com/2833/9121590828_f56a93fe31_o.jpg)
06-01-2014, 10:54 PM
(06-01-2014, 10:41 PM)robb41488 Fow on the E10 has been discontinued for no aparent reason
Sent from my SCH-I535 using Tapatalk
as is the case for a bunch of HPI option parts since the Hobbico deal.
HPI Sprint 2 Flux - full carbon fiber/aluminum upgrades 50/50
HPI Sprint 2 Flux - RWD project
HPI RS4 Sport 3 - carbon fiber/aluminum shelf queen
wareagle84
06-01-2014, 10:54 PM #10(06-01-2014, 10:41 PM)robb41488 Fow on the E10 has been discontinued for no aparent reason
Sent from my SCH-I535 using Tapatalk
as is the case for a bunch of HPI option parts since the Hobbico deal.
HPI Sprint 2 Flux - full carbon fiber/aluminum upgrades 50/50
HPI Sprint 2 Flux - RWD project
HPI RS4 Sport 3 - carbon fiber/aluminum shelf queen
Users browsing this thread:
Users browsing this thread: