Which BL setup to buy? and is it worth throwing so much money in my tt-01?

Hey guys, I'm ordering a crap load of stuff off RCmart and due to my location(Pakistan) It's best I order from the sites that I KNOW have no shipping issues to Pakistan. So I'm limited to the Electronics they have in stock at the moment
I'm looking for something around 150 bucks.

Links:
ESC+motor
http://www.rcmart.com/motor-heat-sink-br..._1301.html

ESC:
http://www.rcmart.com/motor-heat-sink-br..._1021.html

Motors:
http://www.rcmart.com/motor-heat-sink-br...0_946.html

I was looking to buy a sensored system. But honestly, how much difference does it make?

Another thing. The amount of money I'll be putting into my tt-01 doesnt seem to be worth it apparently. Even though I've done mods to steering to get 45-50* angle steering. Should I bother throwing in so much money or should I just buy a new chassis? If so, I'd like to buy one that doesn't require to many hop ups. Like besides CS parts and a decent motor/esc combo. I'm looking to go belt driven..

And lastly, This will be my first Bl system so I'll be needing Li-Po's for a decent performance too. again, Limited by RCmart, Which would be a decent charger and battery?

http://www.rcmart.com/battery-charger-c-52.html

Any help appreciated

I've been looking at getting a charger and I think this is the 1 I'm going to get from rcMart
I've heard but have no experience with sensored systems that they are smoother at low rpm than non sensored I'm also looking to upgrade my unsensored setup I might get this  or this
TT-01's just don't have the  adjust-ability that most drifters want in a chassis they are OK for getting to grips with learning to drift but eventually we move on to something that's more challenging, as you may well guess I have 1 too! There is a top 3 budget drift chassis write up on the DM site the TT-01 takes first place. I also have the second place getter the Sakura D3 CS which come CS 2.14 out of the box but does need some hop-ups like harder springs for the front and a few mods to get belt tension issues solved but is still not a bad kit with some good points to it. I'm sure other people will have their opinions? anyway if you want to keep your TT-01 there are a few FRP kits that cost as much as another TT-01 you can look into like Eagle for 1 which gives the chassis a bit more adjustment? Active hobbies does a front midship kit for them as do a few other companies.

[robb41488]

i would  definitely  suggest getting a sensored system. sensorless is coggy and notchy.

hobbywing are good systems for the money.

as for chargers i own nothing but hobbyking ones and love them to death. never had an issue yet.

[Piper]

sensored ftw, Look at getting a belt driven chassis. Just because their is a lot of hop ups doesn't make them all necessary. For example Steering angle is more sought after then bling.

So I think I'm gonna stick with this for esc
http://www.rcmart.com/champion-combo-135...=1560_1021

And going for an LRP 10.5 motor. should be a decent setup

For charger, I looked some up. I'm only going to buy a charger once so might aswell spend a pretty penny. this is what i'm looking at
http://www.amainhobbies.com/product_info...-40A-1000W

and powersource:
http://www.hobbyking.com/hobbyking/store...0amp_.html

Battery:
http://www.hobbyking.com/hobbyking/store..._Pack.html

Same one in 7600 Mah.

Friend is coming to Pakistan so He's going to order there and bring em to me

Any thoughts on these guys?

And I'm going to stick to the tt-01 for now. Think I need to get better at drifting before I should go for a Yok DIB. lol

thanks guys

Hey did you realise that battery is a 3.7v saddlepack? you'll need 2

whoops. wrong link. Lol. dw, I'm getting the car pack.

lol thought it may have been.