mp3ranger sprint 2 drift setup
mp3ranger sprint 2 drift setup
Manufacturer: HPI
Model: Sprint 2 Drift
Track Surface: cement
Tires: HPI a-type drift
Motor and ESC: 15t + hpi SC-15WP
Servo: Airtronics 94362
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -2
Toe (Degrees) (Specify Toe in or out): 0
Caster (Degrees):6
Kick-up (mm): stock
Sway Bar (yes/no): no
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): 13x25x1.7mm 7 COILS
Damper Oil (indicate weight or #): losi 20wt
Upper Damper Position (Lower # indicates inner most position): center hole
Lower Damper Position (Lower # indicates inner most position): inter hole
Other (Weights, Mods, etc): 1.5oz of lead weight on the front bumper. One-way diff , reddrilled the ackerman locations
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): -2
Toe (Degrees) (Specify Toe in or out): 3
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):no
Ride Height (mm):6
Springs (indicate type, length, hardness, etc): 13x25x1.7mm 7 COILS
Damper Oil (indicate weight or #): losi 20wt
Upper Damper Position (Lower # indicates inner most position): 2nd hole in
Lower Damper Position (Lower # indicates inner most position): other hole
Other (Weights, Mods, etc): install a locked balldiff to cut down weight
Drivetrain (Optional)
Front Belt (mm or teeth):58T
Rear Belt (mm or teeth):169T
Front Pulley (teeth and differential type): 32T
Front Center Pulley (teeth and differential type): 15T
Rear Center Pulley (teeth and differential type): 15T
Rear Pulley (teeth and differential type): 32T
Gearing
Spur (teeth and pitch):90
Pinion (teeth and pitch):23
RC Drift Chassis Information
Manufacturer: HPI
Model: Sprint 2 Drift
Track Surface: cement
Tires: HPI a-type drift
Motor and ESC: 15t + hpi SC-15WP
Servo: Airtronics 94362
Chassis Settings
Front Setup
Camber (Degrees) (Positive is out, Negative is in): -2
Toe (Degrees) (Specify Toe in or out): 0
Caster (Degrees):6
Kick-up (mm): stock
Sway Bar (yes/no): no
Ride Height (mm): 6mm
Springs (indicate type, length, hardness, etc): 13x25x1.7mm 7 COILS
Damper Oil (indicate weight or #): losi 20wt
Upper Damper Position (Lower # indicates inner most position): center hole
Lower Damper Position (Lower # indicates inner most position): inter hole
Other (Weights, Mods, etc): 1.5oz of lead weight on the front bumper. One-way diff , reddrilled the ackerman locations
Rear Setup
Camber (Degrees) (Positive is out, Negative is in): -2
Toe (Degrees) (Specify Toe in or out): 3
Caster (Degrees):
Kick-up (mm):
Sway Bar (yes/no):no
Ride Height (mm):6
Springs (indicate type, length, hardness, etc): 13x25x1.7mm 7 COILS
Damper Oil (indicate weight or #): losi 20wt
Upper Damper Position (Lower # indicates inner most position): 2nd hole in
Lower Damper Position (Lower # indicates inner most position): other hole
Other (Weights, Mods, etc): install a locked balldiff to cut down weight
Drivetrain (Optional)
Front Belt (mm or teeth):58T
Rear Belt (mm or teeth):169T
Front Pulley (teeth and differential type): 32T
Front Center Pulley (teeth and differential type): 15T
Rear Center Pulley (teeth and differential type): 15T
Rear Pulley (teeth and differential type): 32T
Gearing
Spur (teeth and pitch):90
Pinion (teeth and pitch):23
TheCarterRoss
12-08-2012, 06:52 PM #2How are you liking your sprint? Have you thought about moving to CS?
![[Image: Vhsk1.jpg]](http://i.imgur.com/Vhsk1.jpg)
Sent from my iPhone using Tapatalk
TraneDrift
01-03-2015, 08:59 PM #3How did you adjust your ride height I'm having problem with that bit. People the droop screws but that doesn't lower it.
Sent from my iPhone using Tapatalk