Forums

Just measured my car Spot.

I have 22ft x 10ft to play with... to make a semi permanent setup or I have like 60x80 ft to make a ad hoc trac with cones etc.


Allright so I was bored... and found a program called Trackmaker, it was originally designed for Mini Z cars but it works well enough to give basic outlines.

Now all of these tracks are 11x5 squares, IE: 2 feet/61cm per Square just under 2x the length of your average 1/10th scale car.

Now beginner tracks:

Figure 8


Big Corners


Technical tracks:

The Flyover & my Currnet Favourite






So whatcha think.

I has the precious!

Too bad all my hopups are taking the long route here.

lol
just got my xerun combo to

Cut my body, Fiance liked it soo much I know have to paint it and sticker it the way she wants.

Lucky I have the D-like one on the way.

let me guess pink lol if it is do it tamiya PS 33 cherry red

at least she likes this stuff, mine calls them toys and wants both of us to have nothing to do with them.

(01-21-2013, 10:12 AM)Cloaked Wrote: [ -> ]Cut my body, Fiance liked it soo much I know have to paint it and sticker it the way she wants.

Lucky I have the D-like one on the way.

lol I'm lucky too then I guess, she knows now they aren't toys they are radio controlled models. And she takes an interest in them. she doesn't however choose the colours for me yet

(01-19-2013, 03:54 AM)tamiya Wrote: [ -> ]

(01-08-2013, 02:55 AM)Tizer Wrote: [ -> ]Yep, FWD racer. That brings me to my next question, does anyone know if the geardiff out of a Sakura S fits?

fits into the gearcase but pulley is 2mm offset so i moved the drive pulley over



but once back together, adjacent belt touches diff casing

Awesome, thanks for the info :^^: I'm not going to use the rear belt, so I think it will fit without problems.

Guess I'm going to order a D3 then:^^: And I'll give it a go in driftspec first to see what its like

(01-21-2013, 12:55 PM)pickled Wrote: [ -> ]let me guess pink lol if it is do it tamiya PS 33 cherry red

Nooo!

Black. But with a weird sticker design. Ill do it but if it looks crap, Ill buy her, her own Sakura Zero and she can drive that around.

(01-21-2013, 01:58 PM)robb41488 Wrote: [ -> ]at least she likes this stuff, mine calls them toys and wants both of us to have nothing to do with them.

She came with me to the Local Off Road track one time and drove my 2WD buggy, after 5 minutes she was not longer spinning out, after 10 minutes she was completing laps without crashing. After 15 she was over taking the local bashers.... then the battery was done and she goes " Cmon lets go".... I didnt even get a drive!

(01-21-2013, 03:39 PM)Tizer Wrote: [ -> ]

(01-19-2013, 03:54 AM)tamiya Wrote: [ -> ]

(01-08-2013, 02:55 AM)Tizer Wrote: [ -> ]Yep, FWD racer. That brings me to my next question, does anyone know if the geardiff out of a Sakura S fits?

fits into the gearcase but pulley is 2mm offset so i moved the drive pulley over



but once back together, adjacent belt touches diff casing

Awesome, thanks for the info :^^: I'm not going to use the rear belt, so I think it will fit without problems.

Guess I'm going to order a D3 then:^^: And I'll give it a go in driftspec first to see what its like

Let us know how you go Tizer as I'm curious to see if a ball diff will work.